Havis Shields Automobile Accessories C B23 User Manual

INSTALL INSTRUCTIONS C-B23  
1999-2006 FORD EXCURSION & FORD F-250 TO F-550 PICK-UP  
FRONT HUMP MOUNT BRACKET  
TOOLS REQUIRED:  
Ratcheting Wrench  
Standard Socket Set  
Torx Bit Set  
Metric Socket Set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
4
4
¼-20 x ¾” Hex Head Bolts  
¼” Flat Washers  
GSM33001  
GSM31005  
SUB ASSEMBLY:  
1. Remove front seat base bolts.  
2. Determine (1) driver and (2) passenger side brackets.  
3. Two passenger brackets are supplied. One of the two brackets will not be used. Passenger side  
bracket with drill hole is intended primarily for use on 2004 Ford F-250 to F-550. This will  
accommodate vehicles with larger passenger seat bases.  
Passenger Side Bracket  
w/ Drill Hole  
Driver Side  
Bracket  
Center  
Plate  
Passenger  
Side Bracket  
INSTALLATION:  
1. MOUNT C-B23 HUMP BRACKET:  
Remove inner bolts on driver and passenger seat bases.  
Bolt Driver Side Bracket to vehicle so that bracket is between seat base and floor.  
Repeat process for passenger side being sure to use correct bracket.  
Bolt Center Plate to Driver and Passenger Side Brackets using (4) ¼-20 x 3/4” Hex  
Head Bolts and ¼” Flat Washers.  
NOTES:  
1. For vehicles with Bench seats cut carpet to expose nuts in floor where bracket hole lands.  
2. If using a Trak mount application, bolt Trak to Center Plate prior to Driver and Passenger Side  
Brackets.  
C-B23-INST-9-06  
 

Graco Baby Monitor 2M21VIB 2M22VIB User Manual
Grizzly Planer T10264 User Manual
Grundig Coffeemaker KM4062 User Manual
Hasbro Games 33500 User Manual
HP Hewlett Packard Computer Accessories AP843B User Manual
HP Hewlett Packard PDAs Smartphones HX2750 User Manual
HP Hewlett Packard Personal Computer 733UK User Manual
HP Hewlett Packard Personal Computer 761n User Manual
HP Hewlett Packard Printer 2420 User Manual
Husqvarna Saw TS 66 R User Manual