HP Hewlett Packard Computer Accessories AP843B User Manual

QuickSpecs  
Overview  
HP MSA P2000 G3 Modular Smart Array Systems  
Hewlett Packard's MSA P2000 Family of storage arrays features P2000 G3 arrays with the latest 8 Gb Fibre Channel, 6 Gb SAS, 10GbE  
iSCSI connected models, and an iSCSI model with four 1 Gb iSCSI ports per controller. The arrays are designed for entry-level customers  
and feature the latest in functionality and host-connect technology while offering excellent price/performance. They are ideal for  
companies with small budgets or limited IT expertise, and also larger companies with departmental or remote requirements. Each  
solution is designed to be easy to deploy, to be secure, along with low management costs, while driving rapid return on investment  
through efficient storage consolidation.  
The MSA P2000 G3 arrays are 2U storage area network (SAN) or direct connect solutions (OS and protocol dependent) offering a choice  
of five controllers - two FC, one SAS, one 10GbE iSCSI and the newest model features a four port 1 Gb iSCSI. The first Fibre Channel  
controller is a high-performance, 8 Gb dual port model. The second offering is a unique dual-purpose Combo controller with two 8 Gb  
Fibre Channel ports with the addition of two 1GbE iSCSI ports. The third controller choice is 6Gb SAS with four ports per controller.  
There is also the addition of a two port 10 Gb iSCSI, while the latest controller introduction features four 1 Gb iSCSI ports per controller.  
Whatever the situation calls for, the P2000 G3 line-up has the right solution.  
The dual-protocol MSA P2000 G3 MSA FC/iSCSI Combo Controller gives exceptional flexibility. The 8 Gb FC ports support a full FC SAN  
while the two 1GbE iSCSI ports can serve two purposes. With this combination you can economically share the array storage resource  
with a smaller department accessing it over iSCSI or enable the new optional Remote Snap functionality over iSCSI protocol (also  
available over FC).  
The MSA P2000 G3 SAS is the follow-on product to the MSA2000sa G2, adding the latest 6 Gb SAS technology to the four host ports per  
controller. The P2000 G3 SAS array is designed for directly attaching up to four dual-path or eight single path rack servers. SAS array  
support for BladeSystems utilizes the HP 6 Gb SAS BL Switch.  
The MSA P2000 G3 10GbE iSCSI brings the very latest in high-performance host connection with technology generally found only in  
higher priced arrays. The bandwidth it provides in conjunction with server consolidation is highly advantageous in shared storage  
configurations. Array connection to 10GbE switches that are in turn connected to 1GbE NICs is commonplace. Directly attached server  
support requires the server units to have 10GbE NICs.  
Rounding out the controller choices is the MSA P2000 G3 iSCSI controller featuring four 1Gb iSCSI Ethernet ports, double the number of  
the G2 model. This allows an array that keeps the price of the components, particularly the interconnects, low while markedly  
increasing the performance capabilities.  
All MSA P2000 G3 models can be equipped with single or dual controllers, feature the same scalability, and offer 6 Gb SAS back-end  
transmission speed to drives and JBODs. Significant data protection advances are delivered by the all P2000 G3 arrays. All G3 units  
come STANDARD with sixty-four snapshot capability at no extra cost and there is an option for the G3 series of five hundred and twelve  
snapshots. Volume Copy (clone) also comes standard. In a further move to protect the user's data, optional Remote Snap (replication)  
capability is offered on the FC, FC/iSCSI, and both iSCSI versions.  
All MSA P2000 G3 models support hot plug replacement of redundant controllers, fans, power supplies, and I/O modules. Hot add of  
expansion enclosures is also supported.  
The controller-less MSA P2000 chassis is offered in two models - one comes standard with twelve Large Form Factor (LFF) 3.5-inch  
drive bays, the other can accommodate twenty-four Small Form Factor (SFF) 2.5-inch drives. Both are able to simultaneously support  
enterprise-class SAS drives, SAS Midline, and archival-class SATA Midline drives. Either chassis can have one or two matching P2000 G3  
controllers (same protocol) and are available with AC or DC power Supplies.  
The HP modular approach to entry level SAN solutions enables incremental customer purchases, allowing the array to grow as needs  
grow, thus allowing a maximum return on investment. Choose a single controller unit for low initial cost with the ability to upgrade  
later; or decide on a model with dual controllers for the most demanding entry-level situations. There are no unexpected additional  
charges, licenses or fees as you add enclosures or hosts and users.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 1  
 
QuickSpecs  
Overview  
HP MSA P2000 G3 Modular Smart Array Systems  
P2000 G3 FC/iSCSI Combo Controllers, 2 installed  
1. Power supplies  
2. 8 Gb Fibre Channel ports  
3. 1GbE iSCSI ports  
5. Reserved for future use  
6. Management Ethernet port  
7. Expansion port  
4. CLI port (mini-USB)  
P2000 G3 SAS controllers, 2 installed  
1. Power supplies  
2. 6Gb SAS ports (four per  
controller)  
4. Management Ethernet port  
5. Expansion port  
3. CLI port (mini-USB)  
P2000 G3 10GbE iSCSI controllers, 2 installed  
1. Power supplies  
2. 10GbE iSCSI ports  
3. CLI port (mini-USB)  
4. Management Ethernet port  
5. Expansion port  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 3  
 
QuickSpecs  
Overview  
HP MSA P2000 G3 Modular Smart Array Systems  
P2000 G3 iSCSI dual controller  
1. Power supplies  
2. 1 GbE iSCSI ports (4)  
3. 1 GbE iSCSI ports (4)  
4. CLI port (mini-USB)  
5. Management Ethernet port  
6. Expansion port  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 4  
 
QuickSpecs  
Models  
HP MSA P2000 G3 Modular Smart Array Systems  
P2000 G3  
P2000 G3 Controllers  
Modular Smart Array  
P2000 G3 Fibre Channel Controllers  
HP P2000 G3 MSA Fibre Channel Controller  
AP836B  
NOTE: two 8Gb FC ports per controller  
HP P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller  
NOTE: two 8Gb FC ports and two 1GbE iSCSI ports per controller  
AP837B  
AW592B  
AW595B  
BK829B  
P2000 G3 SAS Controller  
HP P2000 G3 SAS MSA Array System Controller  
NOTE: four 6Gb SAS ports per controller  
P2000 G3 10GbE iSCSI controller  
HP P2000 G3 10GbE iSCSI MSA Array System Controller  
NOTE: two 10GbE iSCSI ports per controller  
P2000 G3 iSCSI controller (1Gb Ethernet)  
HP P2000 G3 iSCSI MSA Array System Controller  
NOTE: four 1Gb iSCSI ports per controller  
P2000 Chassis  
P2000 Controller-less Chassis (AC-powered)  
HP P2000 LFF Modular Smart Array Chassis  
NOTE: Will accept one or two controllers or Disk Enclosure I/O modules  
AP838B  
AP839B  
HP P2000 SFF Modular Smart Array Chassis  
NOTE: Will accept one or two controllers, not I/O modules  
P2000 G3 Configured Array Systems  
Configured Units, 8 Gb Fibre Channel Systems  
HP P2000 G3 MSA FC Dual Controller LFF Modular Smart Array System  
HP P2000 G3 MSA FC Dual Controller SFF Modular Smart Array System  
HP P2000 G3 MSA FC/iSCSI Dual Combo Controller LFF Array  
HP P2000 G3 MSA FC/iSCSI Dual Combo Controller SFF Array  
Configured Units, 6 Gb SAS Systems  
AP845B  
AP846B  
AW567B  
AW568B  
HP P2000 G3 SAS MSA Dual Controller LFF Array System  
HP P2000 G3 SAS MSA Dual Controller SFF Array System  
Configured Units, 10GbE iSCSI Systems  
AW593B  
AW594B  
HP P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array System  
HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System  
Configured Units, 1Gb iSCSI Systems  
AW596B  
AW597B  
HP P2000 G3 iSCSI MSA Dual Controller LFF Array System  
HP P2000 G3 iSCSI MSA Dual Controller SFF Array System  
P2000 G3 FC SAN Starter Kits  
BK830B  
BK831B  
HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit  
AP847B  
Page 5  
DA - 13551 North America — Version 36 — December 9, 2013  
 
QuickSpecs  
Models  
HP MSA P2000 G3 Modular Smart Array Systems  
includes (1) HP P2000G3 MSA FC Dual Controller LFF Array (AP845B) , (2) HP SN6000  
12port Single Power FC Switch (BK780B) , (4) HP 81Q PCI-e FC Single Port HBA  
(AK344A), (12 ) 8Gb Short Wave FC SFPs (AJ718A ), and (8 ) HP 5M OM3 FC Cables  
(AJ836A ).  
HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit  
AP848B  
(includes (1) HP P2000G3 MSA FC Dual Controller SFF Array (AP846B) , (2) HP 8/24 Base  
16 Ports Enabled SAN Switch (AM868B) , (6) HP 81B PCI-e 8Gb FC Single Port HBA  
(AP769A), (16 ) 8Gb Short Wave B Series FC SFPs (AJ716B ), and (10 ) HP 5M OM3 FC  
Cables (AJ836A )  
Disk Enclosures  
HP P2000 Dual I/O LFF Drive Enclosure  
HP P2000 LFF Drive Enclosure I/O Module  
HP D2700 Disk Enclosure  
AP843B  
AP844B  
AJ941A  
Controller-less Chassis (DC-powered)  
HP P2000 DC-power LFF Chassis  
AP840B  
AP841B  
(can add one or two P2000 G3 controllers or P2000 JBOD I/O modules)  
HP P2000 DC-power SFF Chassis  
Smart Buys  
HP P2000 G3 FC/iSCSI DC LFF Array/Smart-Buy- Americas  
Includes: (1) HP P2000 G3 MSA FC/iSCSI DC LFF Array  
(6) HP P2000 450GB 6G SAS 15K 3.5in DP HDD  
HP P2000 G3 FC/iSCSI DC SFF Array/Smart-Buy- Americas  
Includes: (1) HP P2000 G3 MSA FC/iSCSI DC SFF Array  
(6) HP 300GB 6G SAS 10K 2.5 inch DP ENT HDD  
HP P2000 G3 FC DC LFF Array/S-Buy- Americas  
Includes: (1) HP P2000 G3 MSA FC Dual Controller LFF Array  
(6) HP P2000 450GB 6G SAS 15K 3.5in DP HDD  
HP P2000 G3 FC DC SFF Array/S-Buy- Americas  
Includes: (1) HP P2000 G3 MSA FC Dual Controller SFF Array  
(6) HP 300GB 6G SAS 10K 2.5 inch DP ENT HDD  
HP P2000fc w/24 300GB 6GSAS-7.2TB Bundle- Americas  
Includes: (1) HP P2000 G3 FC/iSCSI Dual Controller SFF MSA Array  
(24) HP 300GB 6G SAS 10K 2.5in DP ENT HDD  
BK748SB  
BK749SB  
BK746SB  
BK747SB  
BK816A  
P2000 G3 Array Bundles  
In some areas HP is offering P2000 G3 Array bundles with SFF SAS drives. These bundles can simplify the process of ordering. HP  
offers these bundles with different type of P2000 G3 Array controllers for different storage capacity needs.  
NOTE: These bundles are not offered worldwide so please check the availability for your region  
Protocol  
Raw Capacity  
Regions  
Bundle Description  
SKUs  
Availability  
Fully Populated Bundles:  
FC Bundles 3.5 TB  
AMS  
APJ  
HP P2000 G3 FC DC w/24 146GB SAS  
15K SFF HDD 3.5TB Bundle  
BV901B  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 6  
 
QuickSpecs  
Models  
HP MSA P2000 G3 Modular Smart Array Systems  
7.2 TB  
AMS  
APJ  
HP P2000 G3 FC DC w/24 300GB SAS  
10K SFF HDD 7.2TB Bundle  
BV902B  
BV903B  
QR517B  
QR521B  
QW945B  
14.4 TB  
21.6 TB  
AMS  
APJ  
HP P2000 G3 FC DC w/24 600GB SAS  
10K SFF HDD 14.4TB Bundle  
AMS  
APJ  
HP P2000 G3 FC 24x900GB SAS SFF  
Bundle  
24 TB  
AMS  
APJ  
HP P2000 G3 FC 24x1TB SAS SFF  
Bundle  
7.2 TB AMS  
AMS  
APJ  
HP P2000 G3 FC DC w/24 300GB SAS  
15K SFF HDD 7.2TB Bundle  
FC/iSCSI Combo  
Bundles  
21.6 TB  
24 TB  
AMS  
APJ  
HP P2000 G3 FC/iSCSI MSA DC w/24  
900GB SAS 10K SFF HDD 21.6TB  
Bundle  
QR518B  
QR522B  
AMS  
APJ  
HP P2000 G3 FC/iSCSI MSA DC w/24  
1TB SAS 7.2K SFF MDL HDD 24TB  
Bundle  
SAS Bundles  
7.2 TB  
14.4 TB  
21.6 TB  
24 TB  
AMS  
APJ  
HP P2000 SAS DC w/24 300GB SAS  
10K SFF HDD 7.2TB Bundle  
BV908B  
BV909B  
QR519B  
QR523A  
AMS  
APJ  
HP P2000 SAS DC w/24 600GB SAS  
10K SFF HDD 14.4TB Bundle  
AMS  
APJ  
HP P2000 G3 SAS MSA DC w/24 900GB  
SAS 10K SFF HDD 21.6TB Bundle  
AMS  
APJ  
HP P2000 G3 SAS MSA DC w/24 1TB  
SAS 7.2K SFF MDL HDD 24TB Bundle  
1G iSCSI  
Bundles  
7.2 TB  
AMS  
APJ  
HP P2000 G3 iSCSI DC w/24 300GB  
SAS 10K SFF HDD 7.2TB Bundle  
BV911B  
QR520B  
21.6 TB  
AMS  
APJ  
HP P2000 G3 iSCSI MSA DC w/24  
900GB SAS 10K SFF HDD 21.6TB  
Bundle  
24 TB  
AMS  
APJ  
HP P2000 G3 iSCSI MSA DC w/24 1TB  
SAS 7.2K SFF MDL HDD 24TB Bundle  
QR524B  
Half Populated Bundles:  
FC Bundles 3.6 TB  
AMS  
APJ  
HP P2000 G3 FC DC w/12 300GB SAS  
10K SFF HDD 3.6TB Bundle  
BV913B  
BV914B  
7.2 TB  
AMS  
APJ  
HP P2000 G3 FC DC w/12 600GB SAS  
10K SFF HDD 7.2TB Bundle  
EMEA  
10.8 TB  
12 TB  
AMS  
APJ  
HP P2000 G3 FC MSA DC w/12 900GB  
SAS 10K SFF HDD 10.8TB Bundle  
QR525B  
QR529B  
AMS  
APJ  
HP P2000 G3 FC MSA DC w/12 1TB SAS  
7.2K SFF MDL HDD 12TB Bundle  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 7  
 
QuickSpecs  
Models  
HP MSA P2000 G3 Modular Smart Array Systems  
3.6 TB  
AMS  
APJ  
HP P2000 G3 FC DC w/12 300GB SAS  
15K SFF HDD 3.6TB Bundle  
QW949B  
FC/iSCSI Combo  
Bundles  
10.8 TB  
12 TB  
AMS  
APJ  
HP P2000 G3 FC/iSCSI MSA DC w/12  
900GB SAS 10K SFF HDD 10.8TB  
Bundle  
QR526B  
QR530B  
AMS  
APJ  
HP P2000 G3 FC/iSCSI MSA DC w/12  
1TB SAS 7.2K SFF MDL HDD 12TB  
Bundle  
SAS Bundles  
3.6 TB  
7.2 TB  
10.8 TB  
12 TB  
AMS  
APJ  
HP P2000 G3 SAS DC w/12 300GB SAS  
10K SFF HDD 3.6TB Bundle  
BV917B  
BV918B  
QR527B  
QR531B  
QW951B  
AMS  
APJ  
HP P2000 G3 SAS DC w/12 600GB SAS  
10K SFF HDD 7.2TB Bundle  
AMS  
APJ  
HP P2000 G3 SAS MSA DC w/12 900GB  
SAS 10K SFF HDD 10.8TB Bundle  
AMS  
APJ  
HP P2000 G3 SAS MSA DC w/12 1TB  
SAS 7.2K SFF MDL HDD 12TB Bundle  
3.6 TB  
AMS  
APJ  
HP P2000 G3 SAS DC w/12 300GB SAS  
15K SFF HDD 3.6TB Bundle  
1G iSCSI G3  
Bundles  
3.6 TB  
7.2 TB  
10.8 TB  
AMS  
APJ  
HP P2000 G3 iSCSI DC w/12 300GB  
SAS 10K SFF HDD 3.6TB Bundle  
BV919B  
BV920B  
QR528B  
AMS  
APJ  
HP P2000 G3 iSCSI DC w/12 600GB  
SAS 10K SFF HDD 7.2TB Bundle  
AMS  
APJ  
HP P2000 G3 iSCSI MSA DC w/12  
900GB SAS 10K SFF HDD 10.8TB  
Bundle  
12 TB  
AMS  
APJ  
HP P2000 G3 iSCSI MSA DC w/12 1TB  
SAS 7.2K SFF MDL HDD 12TB Bundle  
QR532B  
QW952B  
3.6 TB  
AMS  
APJ  
HP P2000 G3 iSCSI DC w/12 300GB  
SAS 15K SFF HDD 3.6TB Bundle  
EMEA  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 8  
 
QuickSpecs  
Features  
HP MSA P2000 G3 Modular Smart Array Systems  
Key Features  
The HP P2000 G3 Modular Smart Array family encompasses five controllers, each featuring different protocols or combination of  
protocols to match the exact needs of the user.  
P2000 G3 FC/iSCSI Combo MSA controller: this unique controller offers both 8 Gb Fibre Channel and 1 GbE iSCSI functionalities  
built into a single array controller. This allows customers to enable storage needing high performance thru the FC ports while  
leveraging their SAN investment by sharing the array resources with smaller departments through low-cost iSCSI. It also  
enables optional Remote Snap (replication) for data protection.  
P2000 G3 FC MSA controller: Dual 8 Gb Fibre Channel host ports per controller give high performance with a mature topology  
and is compatible with the largest installed base of SAN users.  
P2000 G3 10GbE iSCSI MSA controller: HP was the first of the major modular array manufacturers that brought a high  
performance dual-ported 10GbE iSCSI solution to the entry level segment. Ideal for those who want to utilize cost-effective  
Ethernet as their infrastructure without sacrificing access time to their data. Now supports Remote Snap (replication).  
P2000 G3 SAS MSA controller: the P2000 G3 SAS model gives fast 6 Gb transmission rates with low cost SAS connections. Four  
host ports per controller support a highly efficient direct connect configuration.  
P2000 G3 iSCSI MSA controller offers four 1 Gb iSCSI ports utilizes the popular Ethernet infrastructure with its low cost and ease  
of management, while the additional ports assure increased performance over the previous generation. Now supports Remote  
Snap (replication).  
All P2000 G3 models offer a common set of valuable features:  
Ease of management featuring browser-based out-of-band access. This allows a department or small company to effectively  
handle growing storage requirements, with the aid of an intuitive GUI to administer the unit with a minimum of complexity. Ideal  
for local or remote installations.  
All G3 models come standard with 64 controller-based snapshots and clone capability. The G3 arrays also support an optional  
512 snaps.  
Choose either a low-cost single controller array or start with a configured dual controller array model to fit the budget, high  
availability, and performance needs.  
All models feature a wide variety of drives: enterprise-class SAS, SAS Midline, and archival-class SATA Midline in either P2000  
LFF 3.5-inch or HP Storage SFF 2.5-inch drives.  
P2000 G3 models can have a maximum number of P2000 LFF drive enclosures (7), a maximum number of D2700 SFF enclosures  
(5), or mix both sizes. The array can grow incrementally from a few drives to 178 TB SAS, 384 TB of SAS MDL or 192 TB SATA  
MDL.  
2 GB transportable read/write cache per controller. Battery-free cache backup with super capacitors and compact flash  
Vdisks can be spanned across multiple enclosures  
RAID levels 0, 1, 3, 5, 6, 10, 50  
Maximums vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 0, 3, 5, 6, and 10; max of 32 drives  
for RAID level 50  
512 LUNs with LUN sizes greater than 40TB depending on the RAID configuration chosen. The maximum LUN size is 64TB  
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)  
Upgradable by design. Owners of an original MSA2000 G1 or G2 array are able to do data-in-place controller upgrades to the  
P2000 G3 FC, Combo FC/iSCSI, 1 Gb or 10GbE iSCSI, or P2000 G3 SAS. Cross protocol upgrades are also supported between the  
protocols. This unique ability protects the earlier investments in chassis, drives, and JBODs  
Follow us on twitter and be a part of the conversation, and get the latest P2000 G3/MSA related news and information at:  
HP P2000 G3 FC MSA SAN Starter Kits  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 9  
 
QuickSpecs  
Features  
HP MSA P2000 G3 Modular Smart Array Systems  
The new P2000 G3 FC MSA SAN Starter kits are offered to simplify ordering and implementation of your SAN. HP includes all the  
necessary hardware components to build your own SAN solution in one package, just add the drives of your choice. These kits are  
offered at very affordable prices which reflect a savings over purchasing each SAN component separately.  
Virtualization SAN Starter HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit  
AP848B  
Kit  
The HP P2000 G3 FC MSA Dual Controller Virtualization SAN Starter Kit addresses the  
growing need for server and storage administrators to deliver end-to-end storage,  
virtualization, and management capabilities across their network infrastructure. The  
hardware bundle consists of six Host Bus Adapters (HBAs), two FC switches, a P2000 G3  
FC MSA Dual Controller Array (SFF Chassis), sixteen 8Gb FC SFPs , ten HP 5M FC cables  
as well as two licenses per switch enabling Server Application Optimization (SAO) and  
Adaptive Networking (AN). SAO is an adapter technology that offers Quality of Service  
(QoS) capabilities that can be used in conjunction with fabric wide QoS and to enable a  
high performing, virtualized infrastructure. With SAO deployed, administrators can  
protect a VM and its application by assigning its IO flow to a specific priority level. The  
QoS priorities are enforced at the hardware level, thereby providing adequate  
bandwidth during periods of high congestion. Applications such as email and databases  
achieve better performance when deployed in specific SAO and MSA configurations.  
Small Business SAN  
Starter Kit  
HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit  
AP847B  
The HP P2000 G3 FC MSA Dual Controller Small Business SAN Starter Kit is a unique  
end-to-end 8 Gbps SAN Solution, just add disks and power. This kit includes one 8 Gbps  
P2000 G3 FC MSA Dual Controller Array (LFF Chassis), four 8 Gbps FC HBAs, two HP  
SN6000 Stackable 8 Gbps 8-port FC switches, twelve 8Gb FC SFPs, eight HP 5M FC  
cables and HP unique Simple SAN Connection Manager (SSCM) SAN management  
software, cables, rails and optics. SSCM is the only SAN management software that can  
manage the FC switch, HBA and provision HP storage from a single pane of glass.  
Application Solutions  
The HP P2000 SAN is the ideal solution for customers running Oracle, Microsoft, SAP environments and  
those customers who are deploying virtual server technologies like VMware, Hyper-V, and Oracle Virtual  
Machine. The HP P2000 SAN delivers enterprise functionality that enhances virtual environments,  
simplifies management, and reduces costs. Easy to deploy, scale and maintain, HP P2000 SANs ensure  
that crucial business data remains available.  
HP has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor  
technology through extensive testing with the HP P2000 SAN, HP servers, and management software;  
high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and  
SAP application platforms. As a result, our customers can expect a wide range of operational and business  
benefits where they can:  
Deploy IT assets across multiple locations.  
Incrementally grow storage without interruption.  
Enable high availability and disaster recovery capabilities for critical applications.  
Deploy a remote disaster recovery site.  
Learn more  
To learn more about specific HP Storage Solutions that are built with Oracle, Microsoft, SAP and  
Virtualization environments in mind, visit the solution sites supporting each of these applications.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 10  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
P2000 G3 FC  
P2000 G3 SAS  
P2000 G3 10GbE iSCSI  
P2000 G3 iSCSI (1GbE)  
Capacity  
LFF: 7.2 TB SAS  
LFF: 7.2 TB SAS  
LFF: 7.2 TB SAS  
LFF: 7.2 TB SAS  
Minimum / with maximum or 48 TB SAS MDL or 24 or 48 TB SAS MDL or 24 or 48 TB SAS MDL or 24 or 48 TB SAS MDL or 24  
additional drive enclosures  
TB SATA MDL  
w/ 7 LFF enclosures:  
57.6 TB SAS,  
TB SATA MDL  
w/ 7 LFF enclosures:  
57.6 TB SAS,  
TB SATA MDL  
w/ 7 LFF enclosures:  
57.6 TB SAS,  
TBSATA MDL  
w/ 7 LFF enclosures:  
57.6 TB SAS,  
384 TB SAS MDL or 192 384 TB SAS MDL or 192 384 TB SAS MDL or 192 384 TB SAS MDL or 192  
TB SATA  
SATA  
TB SATA  
TB SATA  
SFF: 28 TB SAS  
SFF: 28 TB SAS  
SFF: 28 TB SAS  
SFF: 28 TB SAS  
or 24 TB SAS MDL or 12 or 24 TB SAS MDL or 12 or 24 TB SAS MDL or 12 or 24 TB SAS MDL or 12  
TB SATA MDL  
w/ 5 D2700 JBODs:  
178 TB SAS  
TB SATA MDL  
w/ 5 D2700 JBODs:  
178 TB SAS  
TB SATA MDL  
w/ 5 D2700 JBODs:  
178 TB SAS  
TB SATA MDL  
w/ 5 D2700 JBODs:  
178TB SAS  
or 149 TB SAS MDL or  
74.5 TB SATA MDL  
or 149 TB SAS MDL or  
74.5 TB SATA MDL  
or 149 TB SAS MDL or  
74.5 TB SATA MDL  
or 149 TB SAS MDL or  
74.5 TB SATA MDL  
Controller Cache  
2 GB per controller  
2 GB per controller  
2 GB per controller  
2 GB per controller  
Total LUNs  
512  
512  
512  
512  
maximum LUN size: 64TB maximum LUN size: 64TB maximum LUN size: 64TB maximum LUN size: 64TB  
LUN sizes greater than  
40TB depending on the  
RAID configuration chosen  
Host connect  
Two 8 Gb  
Fibre Channel ports or  
Two 8Gb FC and two 1GbE  
iSCSI ports  
Four 6 Gb (x4)  
SAS ports  
per controller  
Two 10 GbE iSCSI ports  
per controller  
Four 1 Gb  
iSCSI ports  
per controller  
P2000 & MSA2000 have 1  
or 2 controllers, EVA has 2  
controllers standard  
per controller  
Maximum Drives  
w/ expansion  
96 LFF/149 SFF  
64  
96 LFF/149 SFF  
96 LFF/149 SFF  
64  
96 LFF/149 SFF  
64  
Maximum host supported  
64  
w/ SAS switch: 32 single  
blade servers (2x c7000),  
or 16 dual density blade  
servers  
(dual controller)  
Optional software:  
Snapshot, clone,  
Remote Snap  
Snapshot, 64 standard  
(max 512)  
Clone (standard)  
Remote Snap (optional)  
Snapshot, 64 standard  
(max 512)  
Snapshot, 64 standard  
(max 512)  
Clone (standard)  
Remote Snap (optional)  
Snapshot, 64 standard  
(max 512)  
Clone (standard) Remote  
Snap (optional)  
Clone (standard)  
Use for Storage  
Primary Storage  
with SAS drives.  
Primary Storage  
with SAS drives.  
Primary Storage  
with SAS drives.  
Primary Storage  
with SAS drives.  
Secondary with SATA  
Secondary with SATA  
Secondary with SATA  
Secondary with SATA  
NOTE: maximum available storage capacity depends on the RAID level being implemented  
Product Technology  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 11  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
8Gb Fibre Channel  
controller  
Two host ports per FC controller shipped with SFPs. The P2000 G3 FC controller can run in either point-to-  
point or FCAL (loop). The default is FCAL which is used in Direct Connect, particularly with two controllers.  
The PtP (fabric) mode is used with almost all switches.  
Combo controller with This ingenious dual-protocol "combo" controller supports a full FC SAN through the 8Gb FC ports, while  
designating the two 1 GbE iSCSI ports to enable remote replication over iSCSI protocol and perform as an  
iSCSI target. This allows economical sharing of the storage resource (the P2000 G3 array) with one  
department needing the performance afforded by the 8 Gb FC ports while simultaneously supporting  
another department with lesser performance needs and a budget only allowing a 1GbE iSCSI network.  
FC and iSCSI ports  
6Gb SAS controller  
Four 4x host ports per 6Gb SAS controller.  
10GbE iSCSI controller Two 10GbE ports per G3 10GbE iSCSI controller. Ports are ready for the choice of SFP (none included)  
Supports the ProCurve and ISS versions of the following 10GbE parts for use in the controllers:  
HP 10Gb Cables  
HP SFP+ 10GbE Copper Cable  
HP ProCurve 10-GbE SFP+-SFP+ Direct Attach Cable  
HP SFP+ Transceivers  
HP BladeSystem 10Gb SR SFP+ and HP BladeSystem 10Gb LRM SFP+  
HP ProCurve 10-GbE SFP+ SR Transceiver and HP ProCurve 10-GbE SFP+ LRM Transceiver  
No SFP+ LR Transceiver support  
1 Gb iSCSI controller  
Modular Chassis  
Four 1 Gb Ethernet iSCSI ports per G3 iSCSI controller  
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SAS and SATA.  
Comes with space for one or two controllers, or P2000 3.5-inch disk Enclosure I/O modules (LFF chassis  
only)  
Drives available  
The P2000 G3 controllers support both the P2000 3.5-inch Large Form Factor (LFF) drives, and the HP  
Storage 2.5-inch Small Form Factor (SFF) drives.  
Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24x7 usage.  
SAS Midline and SATA Midline are usually reserved for archival of data as they are both relatively  
inexpensive and are available in very large capacities.  
The HP entry-level family of arrays can accommodate both SAS and SATA drives within the same enclosure  
making it ideal to have both business-critical, high activity files on SAS drives while using Snapshot, clone,  
or Remote Snap capability to keep back-up or archival data on the less expensive drives.  
For investment protection, the controllers will support single and dual port SAS & SATA drives in a legacy  
single - or dual - domain MSA70. This support allows current owners of MSA70s to migrate their single port  
drives (in their MSA70 only, not into the array head) to be attached to a P2000 G3 FC or SAS. They can only  
cascade to another single I/O MSA70. This is not a data-in-place transition, and overall performance could  
be impacted.  
SAS drive performance can be approximately 30% greater than SATA performance on sequential host I/O.  
SAS performance excels in sequential lower latency response time and random I/O per second transaction  
performance due to higher rpm disk speeds yielding lower seek times. SAS drive random performance is  
generally twice that of SATA drives.  
NOTE: P2000 and MSA2 3.5-inch Large Form Factor (LFF) drives are for use only in the P2000 G3 or  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 12  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
MSA2000 models. The 2.5-inch Small Form Factor (SFF) drives are supported only with the P2000 G3 or the  
MSA2300 G2 controllers and are Storage hot-plug 2.5-inch drives.  
Optional Disk enclosures Just as the user has a choice of chassis for the array head (LFF and SFF drive bays, AC or DC powered), so  
also do they have a choice of expansion disk enclosures accommodating either drive size. Both the P2000  
and the D2700 disk enclosures can be hot-added to an operating array.  
(NOTE: these are not supported as part of a NEBS-certified configuration with the MSA Carrier Grade  
Chassis. There is a certified JBOD listed in the Carrier-grade section)  
P2000 3.5-inch drive enclosure. This 2U storage enclosure (AJ941A) is designed to support twenty five  
Storage 2.5-inch Universal form factor (SFF) 6Gb SAS or SATA hard drives. It ships standard with dual I/O  
modules installed.  
This 3.5-inch drive enclosure can be attached to either the P2000 G3 FC or SAS LFF or SFF array head.  
Each configured model ships standard with two .5m mini-SAS to mini-SAS cables for cascading to  
other P2000 drive enclosures  
Up to seven P2000 3.5-inch enclosures can be attached to a P2000 G3 FC, FC/iSCSI Combo, or SAS  
controller in the array head.  
D2700 2.5-inch drive enclosure. This 2U storage enclosure (AJ941A) is designed to support twenty five  
ProLiant 2.5-inch Universal form factor (SFF) 6Gb SAS or SATA hard drives. It ships standard with dual I/O  
modules installed.  
This 2.5-inch drive enclosure can be attached to a P2000 G3 controller (SFF or LFF) array head  
The D2700 enclosure ships with a two .5m miniSAS to miniSAS cable.  
Up to five D2700 may be attached to the P2000 G3 array head, given total support for 149 SFF drives.  
Scalability  
The P2000 G3 FC, Combo FC/iSCSI, SAS, 1 Gb or 10GbE iSCSI controllers are designed to allow an installation  
to begin with smaller capacity and be able to grow gradually as needed. The flexibility of SAS or SATA drive  
technology, form factors, sizes, speeds, and costs per GB allows a system to easily fit in almost any budget.  
Large Form Factor configurations can scale up to 7.2 TB SAS, 36TB SAS MDL or 24 TB SATA,  
expandable to 57.6 TB SAS, 384 TB SAS MDL or 192 TB SATA with the addition of a maximum of seven  
P2000 3.5-inch Drive Enclosures.  
Small Form Factor configurations can scale from 21.6 TB SAS, 24 TB SAS MDL or 12 TB SATA MDL.  
With the addition of five D2700 JBODs, the P2000 G3 can support 134 TB SAS, 149 TB SAS MDL or  
74.5 TB SATA MDL.  
Users may configure a 24-drive P2000 G3 SFF array head with 12-drive LFF P2000 3.5-inch disk  
enclosures. This is an excellent method for a configuration that supports fast SFF enterprise-class  
SAS drives in the array head, combined with economical LFF drives staged for archival purposes, all in  
the same array.  
Qualification of larger capacity drives is ongoing.  
Vdisks  
LUNs  
Vdisks can span across multiple enclosures, where drives used in the Vdisk can be contained in different  
enclosures. The maximum number of drives that can be used in RAID 1 Vdisk is 2; RAID 0, 3, 5, 6, and 10 is  
16; and for RAID 50 Vdisk is 32.  
The HP 2000 family of arrays supports 512 LUNs (total volumes in a dual controller system) and LUN sizes  
up to 64 TB depending on the RAID configuration chosen. The array supports expansion and deletion of any  
LUN.  
RAID 0, 1, 3, 5, 6, 10, 50 In addition to the usual RAID levels, the P2000 G3 features several important additional levels. RAID 6 is the  
highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous  
write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is  
mirroring and striping without parity. It is the most popular of the multiple RAID levels, allowing large arrays  
with high performance in most cases and superior fault tolerance. RAID 50 combines the block striping and  
parity of RAID 5 with the straight block striping of RAID 0, yielding higher performance than RAID 5 through  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 13  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
the addition of RAID 0, particularly during writes.  
Performance  
Performance numbers are a guideline as established by tests using RAW I/O in an Operating System  
Agnostic test lab environment. 144 GB 15K SAS drives were used in a dual controller configuration of 12  
vdisks consisting of twelve disks per vdisk, 1.6 TB volumes, and 3 volumes per host. 4 hosts directly  
attached to the P2000 G3 array were used in this test configuration (results cannot be expected with a  
single host). Results were achieved in Sequential Writes with 256K blocks; all random tests were based on  
8K block sizes.  
NOTE: Number and type of applications, drive type and number of drives, operating system used, and the  
number of hosts will affect overall performance. This table is provided strictly as a test-lab comparison.  
Note: These numbers reflect a full array configuration with the maximum number of front-end ports, disks,  
and controllers. The test results shown for the P2000 G3 are designed to give a conservative reference  
point for comparisons.  
2000 Array  
Performance  
P2000 G3 FC  
P2000 G3  
SAS  
P2000 G3 10GbE P2000 G3 1GbE iSCSI  
iSCSI  
Protocol (host  
connect)  
8 Gb  
Fibre Channel  
6 Gb  
SAS  
10Gb  
Ethernet  
1 Gb  
Ethernet  
2000 RAID 10 Performance Results  
Sequential Reads  
MB/s  
Sequential Writes  
MB/s  
1,650  
1,650  
850  
1,600  
800  
550  
525  
850  
Random Mix IOPs  
60/40 read/write  
20,500  
23,500  
18,500  
17,200  
2000 RAID 5 Performance Results  
Sequential Reads  
MB/s  
Sequential Writes  
MB/s  
1,650  
1,650  
1,350  
1,600  
1,000  
550  
525  
1,300  
Random Mix IOPs  
60/40 read/write  
14,000  
16,000  
12,500  
9,400  
2000 RAID 6 Performance Results  
Sequential Reads  
MB/s  
Sequential Writes  
MB/s  
Random Mix IOPs  
60/40 read/write  
1,650  
1,300  
8,300  
1,650  
1,100  
9,800  
1,600  
1,000  
7,500  
550  
525  
5,600  
Refer to the paper titled "Upgrading the HP MSA2000 (G1 or G2) to the P2000 G3 MSA ", available in the  
DC-power chassis  
HP is making the two models of controller-less chassis available with direct current (DC) power supplies.  
They each have the two empty bays where users can insert one or two P2000 G3 controller(s). In addition,  
the P2000 chassis with LFF drive bay can have P2000 3.5-inch I/O modules inserted to create a LFF DC-  
power JBOD.  
The 500 watt power supply is designed to operate over the input range of -40VDC to -75VDC.  
SKU  
HP P2000 DC-power LFF twelve 3.5-in Drive Bays  
AP840B  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 14  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
(supports up to 2 controllers or I/O modules)  
HP P2000 DC-power SFF Chassis  
HP Storage Management Utility (SMU). Management access, out-of-band: WEB GUI, CLI. Interface Types:  
AP841B  
Configuration and  
Management Tools  
USB, 10/100 Ethernet. Protocols Supported SNMP, SMI-S, SSL, SSH, SMTP, FTP, HTTP, Telnet  
P2000 Software and  
Documents  
Support CD  
All product documentation (CD can be used on ALL supported server Operating Systems.)  
MSA Device Discovery Tool (Win and Linux) - reports P2000/MSA HW devices, and supported storage  
software  
Host Software Bundles (Win and Linux for both ProLiant x86, ProLiant x64 and Integrity IA64servers)  
CD updated quarterly on HP.com with sustaining firmware updates  
The P2000 G3 contains an embedded SMI-S provider for use by SMI-S client applications. The  
embedded provider is designed to support P2000 configurations with up to 24 hard drives, and up to  
250 mapping paths. A mapping path is defined as a P2000 volume presented through a P2000 target  
port to a Host initiator.  
Hot Plug Expansion and All P2000 G3 models support hot plug expansion and replacement of redundant controllers, enclosures,  
fans, power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of  
disk enclosures is also supported.  
Replacement Support  
Snapshot and Clone  
All G3 arrays come standard with 64 snaps, 512 snaps available. Controller based functionality. Offers  
higher levels of data protection, enabling an almost instant recovery from data failure or corruption. Offers  
alternative development testing of 'offline' production data and the ability to backup snapped/cloned data.  
Overview  
The P2000 G3 arrays come integrated with web browser and CLI based software for storage and RAID  
management, setup, configuration, and troubleshooting. This reduces the cost of ownership by reducing  
the training and technical expertise necessary to install and maintain your HP storage solution.  
The SPOCK database provides interoperability information for thousands of components and millions of  
Supports most HP ProLiant, BladeSystems and Integrity servers including  
Server Compatibility  
NOTE: depends on protocol  
HP ProLiant DL, ML  
HP c-Class Blade Servers  
Integrity servers, IA64 (FC and FC/iSCSI support only)  
Industry Standard servers  
support  
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP  
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server Catalog.  
HP Division recommends that the Third-Party Server Vendor is an active member of TSANet. Refer  
Non-HP servers will generally be supported if the HP storage stack is used. This includes supported  
HP branded HBAs and drivers, and supported FC switches.  
OS Support  
Fibre Channel ports  
Refer to the HP support statements for complete current OS version support:  
Microsoft Windows Server 2012  
Microsoft Windows Server 2008 IA32, x64, IA64 (Standard, Enterprise, Datacenter)  
Microsoft Windows Server 2008 R2 x64  
Microsoft Windows 2003 SP1, SP2, and R2 and 2003 R2 IA32, x64  
HP-UX  
Red Hat Linux (32/64)  
SuSE SLES (32/64)  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 15  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
Microsoft Windows Server 2008 x64 Hyper-V  
VMware  
OpenVMS  
Apple Mac OS X (requires ATTO Celerity 8Gb FC HBA)  
Solaris 10 (x86)  
OS Support  
HP-UX  
Windows  
OpenVMS  
Linux  
Fibre Channel Ports  
(Integrity)  
OS Support  
Microsoft Windows Server 2012  
Microsoft Windows Server 2008 and 2008 R2 (x64, IA64)  
Microsoft Windows Server 2008 x64 Hyper-V  
Microsoft Windows 2003 (SP1, SP2, and R2) and 2003 R2 (IA32, x64)  
Red Hat Enterprise Linux (32/64)  
SuSE Linux IA32, x64  
1GbE iSCSI ports  
on the G3 Combo FC/iSCSI  
Controller  
VMware ESX  
OS Support  
G3 SAS Controller  
Refer to the HP support statements for complete current OS version support:  
Microsoft Windows Server 2012  
Microsoft Windows Server 2008 IA32, x64  
Microsoft Windows Server 2008 R2  
Microsoft Windows 2003 and 2003 R2 IA32, x64  
Red Hat Linux (32/64)  
SuSE SLES (32/64)  
Microsoft Windows Server 2008 x64 Hyper-V  
VMware  
Solaris 10 (x86)  
OS Support  
G3 1Gb iSCSI Controller  
Microsoft Windows Server 2012  
Microsoft Windows Server 2008 SP1, SP2, R2  
Microsoft Hyper-V (x64 only)  
Microsoft Windows Server 2003 and 2003 R2, SP2  
VMware  
Red Hat Linux (32/64)  
SuSE SLES (32/64)  
OS Support  
G3 10GbE iSCSI Controller  
Microsoft Windows Server 2012  
Microsoft Windows Server 2008 SP1, SP2, R2  
Microsoft Hyper-V (x64 only)  
Microsoft Windows Server 2003 and 2003 R2, SP2  
Red Hat Linux (32/64)  
SuSE SLES (32/64)  
VMware  
NOTE: the G3 10GbE array must connect to a 10GbE switch; direct connect to the G3 10GbE array must be  
to a 10GbE NIC and supported by the OS.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 16  
 
QuickSpecs  
Family Information  
HP MSA P2000 G3 Modular Smart Array Systems  
Web Browser support  
The P2000 G3 and the older MSA2000 support target based management, and include a Web  
interface and a telnet interface, and require a web browser for management.  
The P2000 G3 FC requires Microsoft Internet Explorer V7.x or V8.x  
The original MSA2000 and the MSA2000 G2 arrays require Microsoft Internet Explorer V6.X and V7.X  
(strongly encouraged)  
Mozilla Firefox 1.0.7 or later is supported  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 17  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
VMware Site Recovery  
VMware Site Recovery Manager (SRM)  
Manager (SRM)  
VMware vCenter Site Recovery Manager (SRM) is an extension to VMware vCenter that delivers business-  
continuity and disaster-recovery solution that helps you plan, test, and execute the recovery of vCenter  
virtual machines. SRM can discover and manage replicated datastores, and automate migration of  
inventory from one vCenter to another. Site Recovery Manager integrates with the underlying replication  
product through a Storage Replication Adapter (SRA).  
HP P2000 Site Recovery Adapter (SRA)  
The HP P2000 SRA, a free-to-use plugin, is the program that integrates the VMware cCenter SRM with HP  
P2000 G3 arrays. It enables full-featured use of the VMware SRM. It is a host-software component  
installed on a Microsoft Windows Server that enables disaster recovery management (DRM) software on  
the host to communicate and control certain aspects of the replication feature in storage systems  
connected to the server. It allows the VMware SRM software to automatically coordinate virtual machine  
failover and failback between a protected data center and a disaster recovery site by employing a disaster  
recovery solution called Remote Snap. A perfect combination of the Remote Snap replication and VMware  
SRM provides an unfailing automated solution for implementing and testing the disaster recovery between  
sites located across geographies. It enables communication between the HP P2000 Remote Snap  
replication functionality that is embedded in HP P2000 Fibre Channel, iSCSI, and Combo Fibre Channel  
systems. Users are required to acquire Remote Snap license for their local and remote HP P2000 G3 arrays  
to use the HP P2000 SRA.  
Site Recovery Manager Requirements/Dependencies:  
Requires vSphere 5.0/SRM 5.0  
Not compatible with SRM 4.x  
Requires HP's P2000 SRA 2.0 Plug-in (downloadable from Hp.com)  
SRM works with Remote Snap functionality  
Requires purchase of P2000 G3 Remote Snap licenses (one for each site)  
Customers must upgrade to T240 or the latest firmware  
SRM works with FC, iSCSI or Combo controllers only  
HP Insight Control  
Storage Module for  
vCenter  
HP Insight Control Storage Module for vCenter  
HP Insight Control Storage Module for vCenter is a component within the HP Insight Control plug-in for  
vCenter. It provides VMware administrators that are using VMware's vSphere management console  
(vCenter) with the ability to see how virtual machines are mapped to datastores and individual P2000  
volumes. By providing these clear relationships between VM's, datastores and storage, the VMware  
administrator's productivity increases, as does the ability to ensure quality of service. Roles for  
administrators can be defined on an individual basis, providing the ability to apply specific permissions for  
both view and control functions.  
The HP Insight Control Storage Module for vCenter supports mixed array environments including EVA,  
P4000, P2000 (MSA), and the XP array series including the P9500.  
When deployed with the P2000 array, provides the following:  
Active Management functionality for the P2000 array:  
Create/Expand/Delete a Datastore  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 18  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
Create a Virtual Machine from a template  
Monitors the health and status of the P2000  
Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the  
location and attributes of the P2000 within the SAN  
Identifies what storage features are available to allow administrators to match the features  
available on the P2000 to their requirements  
Provide a cluster-level view of the storage  
HP Insight Control Storage Module for vCenter is downloadable from Software Depot:  
vStorage API for Array  
Integration (VAAI)  
The vStorage API for Array Integration (VAAI) is one of the storage application programming interface (API)  
sets in vSphere 4.1. VAAI is an API storage partners can leverage to enhance performance of virtual  
machine (VM) management operations by delegating these operations to the storage array. With hardware  
offload, ESX/ESXi hosts perform certain operations faster and consume less server CPU and memory  
resources, and also storage port and storage fabric bandwidth. VAAI includes high performance and  
scalable VM data path primitives. HP introduced VAAI support for HP MSA P2000 Storage array products  
starting with the T230 firmware release.  
Storage Hardware Primitives for VAAI  
In the VMware vSphere 4.1 release, the HP StorageWorks P2000 G3 MSA Array Systems offload capabilities  
support the following three primitives:  
Full Copy or Hardware Assisted Move  
Block Zeroing or Hardware Assisted Zeroing  
Hardware Assisted Locking or Atomic Test and Set (ATS)  
HP Storage Management The HP Management Pack for Systems Center Operations Manager provides seamless integration with  
Microsoft Systems Center Operations Manager and now System Center Essentials by integrating  
predefined discovery and state monitoring policies, event processing rules and tasks, and diagram and  
topology views for the storage system.  
Pack for Microsoft  
System Center  
For more information:  
HP Storage Management Pack can be downloaded free from the following website:  
Snapshot and Volume  
Copy Software for the  
P2000 G3  
Product Features  
Data Protection  
Snapshots create up to 512 point-in-time pictures of data (512 snaps are exclusive to the P2000 G3)  
Volume Copies create up to 128 point-in-time copies of data  
Recovery is instant - revert data from any previous Snapshot or Volume Copy  
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window  
A 64 snapshot license and Volume Copy are included with all P2000 G3 models.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 19  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
Support and updates are desired for bundled software functionalities (such as 64 LTU Snap and/or  
Volume Copy etc in the P2000 G3 products) a combination HW + SW support care pack must be  
purchased.  
HP does not provide warranty assistance for software products included with our base hardware  
products. This would either be SupportPlus or SupportPlus24. The hardware warranty component of  
these services is accounted for in the pricing of the SP and SP24 care packs.  
Data Testing  
Snap or clone data to test the performance of a software application on 'offline' production data  
Snap or clone data to test how a software patch or enhancement will function on 'offline; production  
dat0061  
P2000 G3 Snapshot and Clone:  
G3 controllers/models come STANDARD with 64 snapshots and Volume Copy software  
512 Snapshot option is ONLY available and supported with the G3, not the prior generation MSA2000  
models  
HP P2000 Array System Snapshot 512 Software LTU  
HP P2000 Array System Snapshot 512 Software E-LTU  
TA806A  
TA806AAE  
MSA2000 and MSA2000 G2 Snapshot and Volume Copy (clone) software:  
Snapshot and Volume Copy software is optional on models other than the P2000 G3.  
The following skus are designated for use by the MSA2000 G2 models. They are neither necessary nor  
available for the P2000 G3 FC.  
HP 2000 Modular Smart Array Volume Copy Software LTU  
T5514A  
HP MSA Recovery Manager Software  
Overview  
MSA Recovery Manager (RM) intelligently creates and manages application specific snapshots that  
can be used to quickly restore application instances or databases. This optional software delivers a  
standalone solution to augment your existing backup software strategy. It provides seamless  
integration with HP P2000 G3 storage hardware.  
Recovery Manager currently supports Microsoft Exchange and Microsoft SQL. Integrated with HP and  
3rd party back up applications, RM provides reliable data recovery. Recovery Manager is integrated  
with Microsoft Volume Shadow Copy Service (VSS) to make non-disruptive point-in-time copies of  
Microsoft Exchange and Microsoft SQL databases for constant data protection. RM eases costs and  
administration by providing rapid, affordable online recovery of Microsoft® SQL Server databases  
from multiple, highly granular point-in-time snapshots. Quickly recover a database to a known point  
in time, speeding up a variety of operations including rapid recovery of the production SQL server.  
What's New  
Support for Microsoft Exchange and Microsoft SQL.  
Integration with HP and 3rd party backup tool allowing backup to tape and/or disk.  
Instant Recovery designed to respond to your needs for 24x7 application availability.  
Support on multiple Windows platforms.  
Models  
HP MSA Recovery Manager Software LTU  
HP MSA Recovery Manager Software E-LTU  
TC399A  
TC399AAE  
Licensing  
HP Recovery Manager Software is licensed per single array. One license is  
required for each array that contains data, specific to applications being  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 20  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
supported by RM, intended for backup and recovery scenarios.  
The above license is applicable for all the applications currently supported.  
License bought for a specific array may not work on another similar array.  
NOTE: Electronic software is available in all countries except China and Japan. For China  
and Japan should order the physical equivalent  
Product Highlights  
Features  
Creates VSS based Point-In-Time snapshots.  
Supports mount, deletion of snapshots.  
Schedules snapshot creation.  
Single GUI & CLI for managing SQL and Exchange and for performing all  
management.  
Auto-discovers applications - SQL and Exchange.  
Group level (Instance/Storage group) or single database level snapshot  
creation.  
Recovery of database based on point-in-time snapshots or media backup.  
Exchange Database Integrity check using Microsoft utilities.  
Integrates with HP Data Protector & Symantec Netbackup for Media Backup &  
recovery.  
Supports 2 types of recovery:  
Volume Recovery  
File Copy Recovery  
Supports recovery from tape backup.  
Supports snapshot policy management (snapshot rotation).  
Supports Microsoft Cluster Server (MSCS), Cluster Continuous Replication  
(CCR) and Data Availability Group (DAG) environments.  
Applications and Platform  
Supports SQL 2005, 2008 & R2, Exchange 2007, 2010.  
Supports Windows platforms as supported by the above applications.  
Supports P2000 G3 (FC/ISCSI/SA).  
HP P2000 Remote Snap  
Software  
(G3 FC and FC/iSCSI,  
1GbE and 10GbE iSCSI  
controllers only)  
HP P2000 Remote Snap Software is array based software that provides remote replication on the HP  
P2000 G3 MSA Array products (except SAS model). HP Remote Snap is a form of asynchronous  
replication which consists of replication of block-level data from a volume on a local system to a  
volume that may be on the same system or on a second independent system. This second system may  
be collocated with the first system or may be located at a remote site. It requires T230Rxx controller  
firmware or higher.  
HP Remote Snap functionality is based on existing Snapshot technology offered by HP P2000 SAN Array  
products. Snapshots are used to track the data to be replicated as well as to determine the differences  
in data updated on the master volume, minimizing the amount of data to be transferred.  
HP Remote Snap replication technology provides the ability to accomplish key data management and  
protection capabilities. First, because Remote Snap uses snapshots as the underlying technology it  
creates multiple local recovery points which can be used for such tasks as to complement daily  
backups; second, replication provides the ability to access data in a remote site which could be used for  
dispersed operations; and third but definitely not least important replication allows for business  
continuance in the event of a failure on the primary site.  
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a point-in-  
time image of the data. This point-in-time image is then replicated to the destination volume by  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 21  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
copying the data represented by the snapshot via a transport medium such as TCP/IP (iSCSI) or Fibre  
Channel. The amount of data transferred is minimized though the use of snapshots whenever possible.  
HP P2000 Array System Remote Snap Software LTU  
TA808A  
HP P2000 Array System Remote Snap Software E-LTU  
TA808AAE  
(NOTE: One license per array is required for replication. For example, if you have two  
P2000 arrays performing replication (from Primary system to Remote System), you will  
need 2 licenses).  
Product Features  
Storage based asynchronous snapshot replication  
Initial copy of data can be performed locally, reducing burden on wide area networks  
Support of both Ethernet and Fiber Channel interconnects provides flexible options to the application  
environments.  
Snapshot based replication technology means only changed data will be replicated to alternate site  
Many to 1 replication (up to 4 nodes) - primary use case is to replicate from "many" branch offices to the  
home office for the purpose of backing up data from the branches  
Single controller to single controller replication  
Mixed controller replication - replication between P2000 G3 Fibre Channel and P2000 G3 FC/iSCSI  
Combo arrays  
Advanced scheduler provides several options to IT administrators for business continuance  
Flexible architecture allows remote replication between P2000 G3 Fibre Channel and/or P2000 G3  
FC/iSCSI Combo arrays. You can also join dissimilar controllers; for instance a Combo controller can  
snap remotely to a 1 or 10 GbE iSCSI array. Protects existing investments and enhances business  
continuity planning objectives.  
Replication Wizard simplifies the task of setting up and establishing replication pairs from one unified,  
easy to use GUI.  
Snapshot based replication enables both local and remote recovery depending on the need. Snapshot  
replication isolates problems to a specific point in time which can be selected by the administrator.  
Additionally snapshot replication supports longer distance replication.  
Multiple relationships provide greater storage flexibility and utilization.  
Bundled 64 Snapshots and Volume Copy integration provides better efficiencies by combining the  
management and array technologies to create local copies.  
Fast application recovery with minimal or no transaction loss  
Creation of disaster tolerant copies of your critical business data  
No-single-point-of-failure solution to increase the availability of your customers data  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 22  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
Customer Benefits  
Disaster Recovery  
Replication technology has typically been used to address disaster recovery issues. Disaster recovery is still  
the driving business case behind replication. Remote replication can be implemented from the production site  
to one or more remote sites across a campus, across town, across a state or across the country. When a  
disaster strikes the primary location, the applications can be brought up at the remote site and continue  
processing against the replicated copies. When the primary site is back online, the replication can be reversed  
and when the data is resynchronized, processing can be switched back to the primary site and business can  
continue. In the past, if an e-mail system experienced a disaster it was an "oh well" moment. The loss of a day  
or more of e-mail was not considered important. Today, e-mail is a critical component of many companies'  
business plans and recovering e-mail after a disaster quickly and completely is required.  
Maintenance  
HP Remote Snap software can also be used to solve other business needs. For instance, E-mail servers may  
need periodic maintenance that can take hours to complete. With remote replication in place, the downtime  
can be minimal (as long as it takes to bring the remote peer of the primary e-mail server online). The primary  
server can be worked on (patches, hardware upgrades, etc.) and then brought back online and into production.  
A whole datacenter can be failed over to a remote site on purpose to perform maintenance on generators, air  
conditioning, etc. Replication can also be used to perform a datacenter move with minimal downtime (fail  
everything to the DR site, move the production datacenter to its new location then fail the DR site back to the  
new datacenter).  
Storage Based  
Data replication is performed at the storage subsystem controller level and is totally transparent to the host,  
alleviating unnecessary host cycles to perform the data mirroring functions. Unlike a fabric based or host  
based solution, the storage based solution dedicates its resources to managing the replication process  
between arrays, with minimal impact to applications, other data or devices on the SAN.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 23  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
Bi-Directional  
The bidirectional HP P2000 Array solution addresses the growing need among businesses to ensure  
continuous availability of applications that are critical to daily business operations. HP P2000 enables two  
sites in a remote replication connection to use each other as a destination to maintain replicated copies of  
online data. This maximizes resource utilization while enabling business continuance, even in the event of  
disaster.  
Disaster Tolerance  
The P2000 G3 FC products utilize snapshot data online and in real time to a remote P2000 G3 through a local  
or extended storage area network (SAN). Additionally, data replication can be bidirectional, meaning that a  
storage array can be both a source and a destination. A particular LUN can be replicated in only one direction  
between the two storage arrays. Write I/O data sent to the source is replicated by HP P2000 Array to the  
destination. A pair of properly configured HP P2000 G3 FC arrays is a replication solution that guarantees data  
integrity in the event of a storage system or site failure.  
Normalization (first initial copy)  
When a DR site is initially created a normalization or initial copy of the data from the source volume to the  
target volume must occur. The P2000 G3 array allows this first copy to take place locally. After completion the  
disks can me manually moved to the remote location. Subsequent changes will only remotely copy the  
changed blocks.  
SAN Extensions  
HP P2000 G3 Array provides the capability to replicate data over direct Fibre Channel. The distances supported  
over dark fiber are determined by the speed of the dark fiber connection and the technology used to  
communicate over the dark fiber.  
Path failover (MPIO)  
MPIO for Windows provides a single multi-path solution for HP P2000 G3 Modular Smart Array on HP servers.  
Support for Windows 2003 and Windows 2003 R2 operating systems is provided by HP MPIO Full Featured  
DSM. For the P2000 G3 this version is 2.6.1.7 or greater.  
Support for Microsoft Windows 2008 is bundled within the operating system  
Support for Linux distributions is with Device Mapper 4.4.0 or greater.  
Support for HPUX is native multipathing in HP-UX v3 and PV-Links in HP-UX v2.  
HP StoreEasy 3000  
Gateway Storage  
Add more value to your P2000 array  
HP MSA P2000 combined with HP StoreEasy 3830 Gateway Storage or StoreEasy 3830 Gateway Storage Blade  
enables you to consolidate block and file storage onto a single, high-performance system - giving your  
business the flexibility to meet changing business needs on-demand.  
HP StoreEasy 3830 Storage delivers efficient, secure, and highly available file services that help address your  
changing file-serving needs. It reduces your cost of ownership by simplifying management, increasing  
resource utilization, centralizing growth, and protecting data. HP StoreEasy 3830 Storage leverages the  
Server Manager capabilities in Microsoft Windows Storage Server 2012 to provide a simple and consistent  
experience for managing block and file storage for multiple workloads centrally.  
HP StoreEasy 3830 Gateway Storage - B7E00A  
HP StoreEasy 3830 Gateway Storage Blade - B7E01A  
HP X3000 G2 Network Add more value to your P2000 array  
Storage Gateways  
Stretch your P2000 array investment by adding file services, iSCSI connectivity, print, and management  
hosting with an X3000 G2 Series Network Storage Gateway platform. X Series Network Storage Gateways are  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 24  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
optimized NAS gateways, that are built on industry-standard HP ProLiant servers and Microsoft's Windows  
Storage Server 2008 R2 operating system pre-installed. Since they're Windows-based, network integration is  
easy, your Windows tools and data protection applications run right on the box, and management has a  
familiar look and feel. The X3000 G2 gateways support a wide range of file serving protocols including SMB,  
NFS, iSCSI, FTP, HTTP and WebDAV for heterogeneous IT environments.  
HP X3400 G2 Network Storage Gateway BV870A  
HP X3800 G2 Network Storage Gateway BV871A  
HP P2000 G3  
Carrier-Grade  
Components  
The P2000 G3 is an 8 Gb Fibre Channel connected 2U storage area network (SAN) or direct connect solution  
designed for network equipment providers (NEPs) and communication service providers. Suited for those who  
need a robust telecom infrastructure--- they need storage devices to catch videos, photos, text, new services -  
-- and need a place to have the data stored and cached.  
The HP P2000 Carrier-Grade Chassis AP841B (RoHS Compliant SKU)) is a controller-less 6Gb chassis capable of  
supporting one or two P2000 G3 8Gb Fibre Channel controllers (AP836A (Retiring SKU) or AP836B (RoHS  
Compliant SKU)) and has twenty-four Small Form Factor (SFF) drive bays. It comes equipped with two DC-  
power power supplies.  
The HP P2000 2.5-in Dual I/O JBOD is a special model disk enclosure designed only for use with the carrier-  
grade array heads. It has 24 drive bays (unlike the D2700 with 25 drive bays) and has dual DC-power supplies.  
It is only sold with a carrier grade array. Five of these JBODs may be cascaded from the array head.  
When used in conjunction with specific Storage SFF SAS drives, the solution is NEBS certified. NEBS level-3  
certification provides the assurance that the equipment is safe to operate and sturdy enough to withstand  
certain physical and environmental (for example, fire, earthquakes) conditions. For Seismic Zone 4 rating, the  
P2000 must be mounted in an HP Seismic Rack (AH335A)  
P2000 DC-power Carrier-grade SFF Chassis  
RoHS Compliant  
SKU  
HP P2000 DC-power SFF Chassis  
NOTE: NEBS certified  
AP841B  
AP836B  
AW595B  
G3 Controller 8Gb FC  
HP P2000 G3 MSA Fibre Channel Controller  
NOTE: (1 or 2) With two 8Gb FC ports per controller. NEBS certified.  
G3 Controller 10GbE iSCSI  
HP P2000 G3 10GbE iSCSI MSA Array System Controller  
NOTE: two 10GbE iSCSI ports per controller NEBS certified.  
G3 Controller 6Gb SAS  
HP P2000 G3 SAS MSA Array System Controller  
AW592B  
NOTE: (1 or 2) with four 6Gb SAS ports per controller. NEBS certified.  
HP Modular Smart Array SC08e 2-ports Ext PCIe x8 SAS Host Bus Adapter  
614988-B21  
SFF Carrier-grade (only) DC-power JBOD  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 25  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
HP P2000 Dual I/O DC-power Carrier-Grade SFF Drive Enclosure  
BV921B  
NOTE: NEBS certified.  
24-drive SFF bays, NEBS certified, NOTE: only sold with carrier-grade arrays  
HP MSA P2000 G3 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and  
HP MSA SFF Hard Disk Drives  
HP ProLiant Server Hard Disk Drives  
HP 146GB 6G SAS 15K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 300GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive  
HP MSA Hard Disk Drives  
512547-B21  
507127-B21  
581284-B21  
581286-B21  
619291-B21  
627117-B21  
Drives, carrier-grade (all NEBS certified)  
HP MSA 146GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 300GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 450GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 600GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 900GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 300GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
Carrier-grade HBA  
E2D54A  
E2D55A  
E2D56A  
E2D57A  
C8S59A  
C8S61A  
HP FC2242SR 4Gb 2-port PCIe Fibre Channel Host Bus Adapter  
A8003B  
AJ763B  
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter  
NOTE: Emulex 82E  
For more information on HP Carrier Grade Platforms go to  
HP P2000 Remote Snap  
Software  
(G3 FC and FC/iSCSI, 1GbE  
and 10GbE iSCSI  
HP P2000 Remote Snap Software is array based software that provides remote replication on the  
HP P2000 G3 MSA Array products (except SAS model). HP Remote Snap is a form of asynchronous  
replication which consists of replication of block-level data from a volume on a local system to a  
volume that may be on the same system or on a second independent system. This second system  
may be collocated with the first system or may be located at a remote site. It requires T230Rxx  
controller firmware or higher.  
controllers only)  
HP Remote Snap functionality is based on existing Snapshot technology offered by HP P2000 SAN  
Array products. Snapshots are used to track the data to be replicated as well as to determine the  
differences in data updated on the master volume, minimizing the amount of data to be transferred.  
HP Remote Snap replication technology provides the ability to accomplish key data management  
and protection capabilities. First, because Remote Snap uses snapshots as the underlying  
technology it creates multiple local recovery points which can be used for such tasks as to  
complement daily backups; second, replication provides the ability to access data in a remote site  
which could be used for dispersed operations; and third but definitely not least important  
replication allows for business continuance in the event of a failure on the primary site.  
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a  
point-in-time image of the data. This point-in-time image is then replicated to the destination  
volume by copying the data represented by the snapshot via a transport medium such as TCP/IP  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 26  
 
QuickSpecs  
Hardware  
HP MSA P2000 G3 Modular Smart Array Systems  
(iSCSI) or Fibre Channel. The amount of data transferred is minimized though the use of snapshots  
whenever possible.  
HP P2000 Array System Remote Snap Software LTU  
TA808A  
HP P2000 Array System Remote Snap Software E-LTU  
TA808AAE  
(NOTE: One license per array is required for replication. For example, if you have two  
P2000 arrays performing replication (from Primary system to Remote System), you will  
need 2 licenses).  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 27  
 
QuickSpecs  
HP MSA P2000 G3 Modular Smart Array Systems  
Service and Support, HP Care Pack, and Warranty Information  
Warranty  
Three-year limited warranty, parts exchange Next Business day delivery  
Enclosures, Hard drives, and Options for the P2000 G3 FC carry their own warranty. Refer to HP's Limited  
Warranty Statement for more information.  
The P2000 G3 FC has been designed with customer self repairable parts to minimize repair time and  
provide greater flexibility in performing defective parts replacement. Please refer to HP's limited warranty  
Statement and parts replacement instructions for further details.  
Products included in various kits carry their own individual warranties.  
NOTE: The warranty of the hard drive options purchased with the P2000 G3 FC, SAS, and 10GbE iSCSI  
products is different for SAS hard drives versus SAS MDL and SATA hard drives. SAS hard drive options have  
a three year warranty and SAS MDL and SATA hard drives options have a one year warranty.  
Service and Support  
Services to accelerate time to results  
HP Storage Services bring you a rich portfolio of consulting and support services designed to add value to  
our core storage products and solutions. We have the know-how and experience to put storage technology  
to work for you. We work closely with you as your strategic partner, leveraging our full services portfolio  
to make sure that everything works to optimize your enterprise.  
Choose from services aligned to our storage product offerings and lifecycle. From mission-critical onsite  
services to innovative web-based remote support, you choose the precise level of attention and support  
your business demands.  
Discover, plan, and design Choose from a rich portfolio of services to make the most of P2000 G3 MSA Array Systems (Goose Island -  
PL Li), so you can efficiently and affordably consolidate, manage, and extract value from unstructured  
data.  
HP Services can help you discover needs and create a plan for simplifying the environment, reducing  
risk, and maximizing your storage investments  
HP Storage Efficiency Analysis - The HP Storage Efficiency Analysis provides customers with a view of  
their storage infrastructure and operating environment; highlighting recommendations for improvements.  
The report provides extensive insight about the existing storage environment, opportunities for efficiency  
gains, asset aging and replacement through interaction with key decision makers  
HP Storage Impact Analysis (SIA) - The HP Storage Impact Analysis service provides a 2-4 week discovery  
engagement with executive summary presentation. The goal of this service is to help provide customers  
guidance on storage related issues and develop remediation plans.  
HP Storage Cloud Design Service - Build a scalable, low-cost enterprise storage environment with  
inherent cloud benefits to meet big data needs.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 28  
 
QuickSpecs  
HP MSA P2000 G3 Modular Smart Array Systems  
Service and Support, HP Care Pack, and Warranty Information  
HP Storage Modernization Service - The HP Storage Modernization service is a 4-6 week service that  
defines the customers envisioned target storage environment based on a proven solution design  
methodology. HP architects will quickly perform tool-assisted automatic discovery and facilitate a two-  
day strategy workshop with all key stakeholders involved in the storage infrastructure initiative  
Deploy and integrate  
We can help you configure, set up, and efficiently use P2000 G3 MSA Array Systems (Goose Island - PL  
Li), as well as help migrate data, improve capacity utilization, and establish information management  
standards used across backup, replication, and archiving needs.  
HP MSA/P2000 Family Disk Array Installation and Startup Service - Implement right from the start, as  
HP experts install, test, and configure your hardware and software onsite. We deliver a tailored storage  
deployment properly integrated into your environment.  
HP Storage Data Migration Services - End-to-end data migration service providing seamless discovery,  
assessment, planning, and design, completely customizable to your organization's storage area network  
or network attached storage environment and using innovative software to help you migrate to HP  
storage quickly and efficiently.  
HP Storage and Data Residency Service - Strategic augmentation of your current environment with HP  
resources who become your trusted advisor to provide answers that are right for your storage and backup  
HP Proactive Select - A flexible way to purchase services to fit your environment with an extensive menu  
of HP Proactive Select event and technical services, such as onsite firmware upgrades, health checks,  
assessments, and education.  
Operate and support  
Choose the right support to maximize uptime, free up your resources, and achieve improved value-as  
you get the most out of the existing IT assets while accelerating time-to-revenue.  
HP Proactive Care 24x7 - Hardware and software support services designed specifically for your  
technology with rapid access to Advanced Solution Center Specialists plus firmware and software  
management and best practice advice  
HP Proactive Care Personalized Support - An option-if you have HP Proactive Care- to bring increased  
personalization of the Proactive Care support experience through the assignment of an Account Service  
Manager (ASM) who provides IT best practice advice to help address IT issues and projects.  
HP Support Plus 24 - Support for environments where proactive help from HP is not required, with 24x7  
hardware and software support onsite that includes third-party support with a maximum four-hour onsite  
response.  
HP Education Services - Comprehensive training for new, as well as experienced, storage administrators  
designed to expand your skills and keep you up to speed with the latest storage and virtualization  
technology from HP Storage.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 29  
 
QuickSpecs  
HP MSA P2000 G3 Modular Smart Array Systems  
Service and Support, HP Care Pack, and Warranty Information  
Optimized Care - Delivers Choose from three levels of operate and support care  
the highest levels of  
HP Proactive Care 24x7-Plus, 20 credits per year  
performance and stability  
through deployment and  
proactive management  
practices  
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new  
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select credits  
per year  
Standard Care - maintains HP Proactive Care 24x7-Plus, 10 credits per year  
high level of uptime, along  
Additional options - HP Proactive Care Personalized Support (once per Proactive Care support new  
environment), an additional day of HP Personalized Support, and 10 additional HP Proactive Select credits  
per year  
with expert help to cut the  
cost and complexity of  
implementation and  
support  
Basic Care - Minimum  
HP Support Plus 24; plus 10 HP Proactive Select credits per year, per array  
recommended support  
Additional options - 10 Proactive Select Credits per Year  
Remote  
Support Automation  
HP Automation provides 24x7 coverage, proactive problem prevention, accurate problem diagnosis and  
faster problem resolution, as well as interactive support portals and tools. This is an integral, and cost-  
free, part of your HP support relationship and we are continually investing in additional cutting-edge  
capabilities to make it better.  
For more information  
To learn more on HP Storage Services, please contact your HP sales representative or HP Authorized  
Channel Partner  
HP Care Pack Services are sold by HP and HP Authorized Service Partners:  
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order  
configuration tools.  
Customers purchasing from a commercial reseller can find HP Care Pack Services at  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 30  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
Configure to Order Program Information  
HP has a very successful Configure to Order program for the P2000 G3 family The P2000 G3 models and options may or may not be  
factory installed in a rack with add-on controllers, switches, P2000 disk enclosures and hard drives. The P2000 G3 arrays may be  
integrated with ProLiant servers or as standalone storage.  
Orders to be shipped through the CTO process must have a minimum of two drives of the same type (SAS, SAS MDL, or SATA) ordered  
per controller. SAN Starter Kits are not eligible for CTO.  
Description  
Product Number  
P2000 G3 Controllers & Controller-less Chassis  
HP P2000 G3 FC Modular Smart Array Controller  
NOTE: two 8Gb FC ports  
AP836B#0D1  
AP837B#0D1  
AW592B#0D1  
AW595B#0D1  
BK829B#0D1  
AP838B#0D1  
AP839B#0D1  
HP P2000 G3 FC/iSCSI Combo Modular Smart Array Controller  
NOTE: two 8Gb FC ports and two 1GbE iSCSI ports  
HP P2000 G3 SAS Modular Smart Array Controller  
NOTE: four 6Gb 4x SAS ports  
HP P2000 G3 10GbE iSCSI Modular Smart Array Controller  
NOTE: two 10GbE iSCSI ports  
HP P2000 G3 iSCSI MSA Array System Controller  
NOTE: four 1Gb Ethernet iSCSI ports  
HP P2000 Modular Smart Array 3.5-in Drive Bay Chassis (LFF)  
NOTE: Will accept one or two controllers or Disk Enclosure I/O modules  
HP P2000 Modular Smart Array 2.5-in Drive Bay Chassis (SFF)  
NOTE: Will accept one or two controllers, not I/O modules  
Disk Enclosures  
HP P2000 Dual I/O LFF Drive Enclosure,  
NOTE: twelve 3.5" drive bays  
Used with single or dual controller LFF or SFF array head  
AP843B#0D1  
AP844B#0D1  
HP P2000 LFF Drive Enclosure I/O Module  
NOTE: no cable included. Designed for use with blank LFF chassis AP838A  
Configured Units  
HP P2000 G3 FC MSA Dual Controller LFF Modular Smart Array System  
HP P2000 G3 FC MSA Dual Controller SFF Modular Smart Array System  
HP P2000 G3 FC/iSCSI MSA Dual Combo Controller LFF Array  
HP P2000 G3 FC/iSCSI MSA Dual Combo Controller SFF Array  
HP P2000 G3 SAS MSA Dual Controller LFF Modular Smart Array System  
HP P2000 G3 SAS MSA Dual Controller SFF Modular Smart Array System  
HP P2000 G3 10GbE iSCSI MSA Dual Controller LFF Array System  
HP P2000 G3 10GbE iSCSI MSA Dual Controller SFF Array System  
AP845B#0D1  
AP846B#0D1  
AW567B#0D1  
AW568B#0D1  
AW593B#0D1  
AW594B#0D1  
AW596B#0D1  
AW597B#0D1  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 31  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
HP P2000 G3 iSCSI MSA Dual Controller LFF Array System  
HP P2000 G3 iSCSI MSA Dual Controller SFF Array System  
BK830B#0D1  
BK831B#0D1  
HP D2700 Disk Enclosure  
Rear Panel components  
4. I/O Module A  
1. Power Supply 1  
2. Power Supply 2  
3. Fan 1  
7. Rear UID push button  
8. Enclosure LEDs  
5. I/O Module B  
6. Fan 2  
9. Power on/standby button  
D2700  
HP D2700 Disk Enclosure  
NOTE: 25 Small Form Factor (SFF) drive bays  
AJ941A#0D1  
HP MSA P2000 G3 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and HP MSA SFF Hard Disk Drives  
HP ProLiant Server SAS & HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
507127-B21  
581284-B21  
581286-B21  
619291-B21  
718160-B21  
512547-B21  
627117-B21  
605835-B21  
E2D55A  
SATA Drives (SFF 2.5-inch)  
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive  
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive  
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive  
HP MSA SAS & SATA Drives HP MSA 300GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
(SFF 2.5-inch)  
HP MSA 450GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 600GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 900GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 1.2TB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 146GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 300GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive  
HP MSA 1TB 6G SAS 7.2K SFF (2.5-inch) Dual Port Midline 3yr Warranty Hard Drive  
E2D56A  
C8S58A  
C8S59A  
E7W47A  
E2D54A  
C8S61A  
C8S62A  
NOTE: Go to the HP Hard Drive Compatibility table for complete drive compatibility  
unsupported configurations will result in voiding the warranty and could result in  
damage to the drive and/or loss of data.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 32  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
Step 1 - P2000 G3 - Base Configuration  
Select one:  
Model Name  
SKU  
HP P2000 Modular Smart Array 3.5-inch Drive Bay Chassis  
AP838B  
Controller-less chassis with twelve Large Form Factor (LFF) drive bays. Space for two controllers.  
HP P2000 Modular Smart Array 2.5-inch Drive Bay Chassis  
Controller-less chassis with twenty-four Small Form Factor (SFF) Storage drives bays. Space for  
two controllers.  
AP839B  
There are two array-head chassis - one with twelve 3.5-inch large form factor bays, the other with twenty-four 2.5-inch small form  
factor drive bays. For an additional twelve drive bays purchase a P2000 3.5-inch Disk Enclosure. You may attach a total of seven P2000  
Drive Enclosures for a total of ninety-six LFF drive bays. For 25 additional SFF drive bays purchase D2700 JBOD. You may attach a total  
of five D2700 JBODs for a total of one hundred and forty nine SFF drive bays. Dual I/O modules JBODS support both single and dual  
controller arrays.  
Step 2 - Options  
Select each option with quantities specified.  
Step 2a - Options  
Quantity Description with Parts Shipped:  
SKU  
1 or 2  
1 or 2  
1 or 2  
1 or 2  
1 or 2  
HP P2000 G3 MSA Fibre Channel Controller  
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis  
AP836B  
HP P2000 G3 MSA FC/iSCSI Combo Modular Smart Array Controller  
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis  
AP837B  
AW592B  
AW595B  
BK829B  
HP P2000 G3 SAS MSA Array System Controller  
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis  
HP P2000 G3 10GbE iSCSI MSA Array System Controller  
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis  
HP P2000 G3 iSCSI MSA Array System Controller  
NOTE: for either the LFF or SFF P2000 or the two DC-powered chassis  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 33  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
Step 2b - SAS and SATA Drive Options  
NOTE: SATA drives are designed for archival or reference data. They should not be used in a heavy or intense I/O environment. Those  
situations require the use of enterprise-class SAS drives. P2000 3.5-inch drives are for use only with P2000 products.  
P2000 Large Form Factor (LFF) SAS drives for P2000 G3 FC and P2000 3.5-inch Disk Enclosure  
HP P2000 300GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive  
HP P2000 450GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive  
HP P2000 600GB 6G SAS 15K rpm LFF Dual Port Enterprise Hard Drive  
AP858A  
AP859A  
AP860A  
P2000 Large Form Factor (LFF) SAS MDL DP drives for P2000 G3 FC and P2000 3.5-inch Disk Enclosure  
HP P2000 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port MDL Hard Drive  
AP861A  
AW555A  
QK703A  
C8R26A  
HP P2000 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port MDL Hard Drive  
HP P2000 3TB 6G SAS 7.2K SFF (3.5- inch) Dual Port MDL 1yr Warranty Hard Drive  
HP MSA 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive  
NOTE: Before installing >3TB HDDs in an P2000 G3 Array please update P2000 array controller firmware to version  
TS230Rxxx or later  
MSA2 Large Form Factor (LFF) SATA drives for P2000 array head an P2000 disk enclosure  
HP MSA2 1TB 7.2K rpm LFF (3.5 inch) Dual-port SATA Hard Disk Drive  
HP P2000 2TB 3G SATA 7.2K rpm LFF MDL Hard Drive  
AJ740B  
AW556B  
HP MSA P2000 G3 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and HP MSA SFF Hard Disk Drives  
HP ProLiant Server Small Form Factor (SFF) SAS drives for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)  
HP 300GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive e  
HP 450GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 600GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 900GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 1.2TB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 146GB 6G SAS 15K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP 300GB 6G SAS 15K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
507127-B21  
581284-B21  
581286-B21  
619291-B21  
718160-B21  
512547-B21  
627117-B21  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 34  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
HP MSA Small Form Factor (SFF) SAS drives for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)  
HP MSA 300GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive e  
HP MSA 450GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 600GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 900GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 1.2TB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 146GB 6G SAS 15K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
HP MSA 300GB 6G SAS 15K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive  
E2D55A  
E2D56A  
C8S58A  
C8S59A  
E7W47A  
E2D54A  
C8S61A  
HP ProLiant Server Small Form Factor (SFF) SAS MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive  
bay)  
HP 1TB 6G SAS 7.2K 2.5in Dual Port Midline 1yr Warranty Hard Drive  
605835-B21  
HP MSA Small Form Factor (SFF) SAS MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive bay)  
HP 1TB 6G SAS 7.2K 2.5in Dual Port Midline 1yr Warranty Hard Drive  
C8S62A  
HP ProLiant Server Small Form Factor (SFF) SATA MidLine drive for P2000 G3 Array (24 drive bay) and the D2700 JBOD (25 drive  
bay)  
(NOTE: SFF SATA drives are single ported and therefore do not have a fail-over path intrinsic to their design)  
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive  
507750-B21  
Step 2c - Drive Enclosure Options  
P2000 Dual I/O 3.5-inch 12 Drive Enclosure  
Rear Panel components  
3. Unit Locator  
4. SAS In Port  
1. Power Indicator  
2. Fault Indicator  
5. SAS Out Port  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 35  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
Use either disk enclosure with Large or Small Form Factor, single or dual controller array heads. Each ship with two .5m mini-SAS to  
mini-SAS cables.  
HP P2000 Dual I/O LFF Drive Enclosure  
HP D2700 Disk Enclosure  
AP843B  
AJ941A  
HP P2000 LFF Drive Enclosure I/O Module  
NOTE: Only used in conjunction with the P2000 blank chassis (AP838A) if a single I/O disk enclosure is desired. No  
AP844B  
cable included)  
Step 2c - SAS Cable Options  
miniSAS to miniSAS Cables:  
Connecting P2000 G3 FC or SAS controller to a JBOD if a longer cable is desired. Also used for attaching the P2000  
G3 SAS host ports to servers  
HP External Mini SAS 2m Cable  
407339-B21  
Step 3 - Other P2000 G3 Options  
Choose optional AC Power Cords (2 required)  
NOTE: Two PDU cables: one 142263-008 (Black) and one 1422633-013 (Grey), ship standard with all AC-  
powered enclosures.  
Power Cord, 220/240 VAC  
227099-001  
Step 4a - Choose Supported Options For Fibre Channel Infrastructure  
Fibre Channel  
Host Bus Adapters -  
X86 servers  
Model  
Description  
SKU  
BladeSystem c-Class Fibre Channel Mezzanine HBAs  
QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem  
HP BLc Emulex LPe1205- 8Gb FC HBA for HP c-Class BladeSystem  
Lpe1105-HP 4Gb FC HBA for HP c-Class BladeSystem  
QMH2462 4Gb FC HBA for HP c-Class BladeSystem Windows and Linux  
Brocade 804 8Gb FC HBA for HP BladeSystem c-Class, Windows, VMware, Linux  
Fibre Channel HBAs  
451871-B21  
456972-B21  
403621-B21  
403619-B21  
590647-B21  
for compatibility details.  
Brocade Fibre Channel HBAs  
HP 81B PCI-e FC HBA Single Port  
HP 82B PCI-e FC HBA Dual Port  
HP 41B 4Gb PCI-e FC HBA  
AP769B  
AP770B  
AP767B  
AP768B  
HP 42B 4Gb Dual-Port PCI-e FC HBA  
Emulex Fibre Channel HBAs  
HP 81E PCI-e FC HBA Single Port  
HP 82E PCI-e FC HBA Dual Port  
AJ762B  
AJ763B  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 36  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
HP FC2142 4Gb PCI-e HBA  
A8002B  
A8003B  
HP FC2242 Dual Channel 4Gb PCI-e HBA  
QLogic Fibre Channel HBAs  
HP 81Q PCI-e FC HBA Single Port  
HP 82Q PCI-e FC HBA Dual Port  
HP FC1142 4Gb PCI-e HBA  
AK344A  
AJ764A  
AE311A  
AE312A  
HP FC1242 Dual Channel 4Gb PCI-e HBA  
Fibre Channel  
Host Bus Adapters -  
Integrity servers  
Integrity  
HP 4Gb 1-port PCI-X 2.0 Fibre Channel Host Bus Adapter  
HP 4Gb 2-port PCI-X 2.0 Fibre Channel Host Bus Adapter  
AB378B  
AB379B  
AD300A  
AD299A  
AD355A  
AD221A  
AD222A  
AD393A  
AD193A  
AD194A  
AH400A  
AH401A  
AH402A  
AH403A  
HP 4Gb 2-port PCIe Fibre Channel Host Bus Adapter  
HP 4Gb 1-port PCIe Fibre Channel Host Bus Adapter  
HP 4Gb 2-port PCIe Fibre Channel Host Bus Adapter  
HP PCIe 1-port 4Gb and 1-port 1000BT Adapter  
HP PCIe 2-port 4Gb and 2-port 1000BT Adapter  
HP PCIe 2-port 4Gb and 2-port 1000BSX Adapter  
HP PCI-X 1-port 4Gb FC and 1-port 1000BT Adapter  
HP PCI-X 2-port 4Gb FC and 2-port 1000BT Adapter  
HP PCI Express 1-port 8Gb Fibre Channel SR (QLogic) Adapter  
HP PCI Express 2-port 8Gb Fibre Channel SR (QLogic) Adapter  
HP 8Gb 1-port PCIe Fibre Channel Host Bus Adapter  
HP 8Gb 2-port PCIe Fibre Channel Host Bus Adapter  
Integrity server  
blades  
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class  
BladeSystem  
403621-B21  
403619-B21  
451871-B21  
456972-B21  
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class  
BladeSystem  
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class  
BladeSystem  
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class  
BladeSystem  
Fibre Channel  
Switches  
HP 8/8 Base SAN Switch  
HP 8/8 SAN Switch  
AM866B  
AM867B  
AM868B  
AM869B  
AM870B  
AM872B  
AM871B  
AP864B  
AP863B  
AP862B  
AP801B  
HP 8/24 Base SAN Switch  
HP 8/40 Base SAN Switch  
HP 8/40 Power Pack+ SAN Switch  
HP 8/80 Power Pack+ SAN Switch  
HP 8/80 Base SAN Switch  
HP 1606 Power Pack+ Extension SAN Switch  
HP 1606 Full Extension SAN Switch  
HP 1606 Base Extension SAN Switch  
HP 2408 FCoE Base Converged Network Switch  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 37  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
HP 2408 FCoE Power Pack+ Converged Network Switch  
Brocade 8/12c SAN Switch for HP BladeSystem c-Class  
AP802B  
AJ820B  
AJ821B  
AJ822B  
C8S45A  
C8S46A  
C8S47A  
Brocade 8/24c SAN Switch for HP BladeSystem c-Class  
Brocade 8/24c SAN Switch for HP BladeSystem c-Class Power Pack+  
Brocade 16Gb/16 SAN Switch for HP BladeSystem c-Class  
Brocade 16Gb/28 SAN Switch for HP BladeSystem c-Class  
Brocade 16Gb/28 SAN Switch Pwr Pk+ for HP BladeSystem c-Class  
SKU  
HP 8/20q Fibre Channel Switch  
NOTE: 8 device ports active, upgradeable to 20 device ports active  
AQ233A  
HP 8Gb Simple SAN Connection Kit  
NOTE: 8 device ports active, upgradeable to 20 device ports active  
AK241A  
AK242A  
AW575B  
AW576B  
BK780B  
HP 8/20q Fibre Channel Switch  
NOTE: 16 switch ports active  
HP SN6000 Stackable 8Gb 24-port single power supply FC Switch  
NOTE: 20 device ports active/4 stacking (ISL) ports active  
HP SN6000 Stackable 8Gb 24-port dual power supply FC Switch  
NOTE: 20 device ports active/4 stacking (ISL) ports active  
HP SN6000 Stackable 8 Gb 12-port Single Power Fibre Channel Switch  
NOTE: 8 device ports/4 stacking (ISL) ports active, upgradeable to 20 device ports active  
Cisco MDS 9124 8-ports Active Fabric Switch  
AG646A  
AG647A  
AG648A  
AW563A  
AW564A  
AG641A  
AG642A  
AG874A  
AG875A  
AG851B  
AW585A  
AW586A  
AP775A  
AP776A  
QK732A  
QK733A  
QK734A  
QK735A  
QK736A  
QK737A  
AJ833A  
Cisco MDS 9124 16-ports Active Fabric Switch  
Cisco MDS 9124 24-ports Active Fabric Switch  
Cisco MDS 8Gb 12-port Fabric Switch for HP BladeSystem c-Class  
Cisco MDS 8Gb 24-port Fabric Switch for HP BladeSystem c-Class  
Cisco MDS 9124e 12-port Fabric Switch for HP c-Class BladeSystem  
Cisco MDS 9124e 24-port Fabric Switch for HP c-Class BladeSystem  
Cisco MDS 9134 24-ports Active Fabric Switch  
Cisco MDS 9134 32-ports Active Fabric Switch  
Cisco MDS 9222i Fabric Switch  
HP SN6000C 16-ports Active Fabric Switch  
HP SN6000C 32-ports Active Fabric Switch  
HP Nexus 5010 Converged Network Switch  
HP Nexus 5020 Converged Network Switch  
PremierFlexOM4+  
type cable  
P2000 G2  
1m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable  
2m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable  
5m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable  
15m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable  
30m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable  
50m HP PremierFlex OM4 LC/LC Multi-mode Optical Cable  
OM3 FC LC-LC cables LC-LC Multi-Mode OM3 Fibre Channel Cable 0.5m  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 38  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
options for the P2000  
G3  
LC-LC Multi-Mode OM3 Fibre Channel Cable 1m  
LC-LC Multi-Mode OM3 Fibre Channel Cable 2m  
LC-LC Multi-Mode OM3 Fibre Channel Cable 5m  
AJ834A  
AJ835A  
AJ836A  
LC-LC Multi-Mode OM3 Fibre Channel Cable 15m  
LC-LC Multi-Mode OM3 Fibre Channel Cable 30m  
LC-LC Multi-Mode OM3 Fibre Channel Cable 50m  
AJ837A  
AJ838A  
AJ839A  
Step 4b - Choose Supported Options For 10GbE Infrastructure  
- verify that the cable/transceiver is supported with the connecting device (i.e. switch or NIC/iSCSI HBA)  
Copper Cable  
HP 0.5m SFP+ 10GbE Copper Cable  
487649-B21  
487652-B21  
487655-B21  
537963-B21  
487658-B21  
455883-B21  
455889-B21  
J9281B  
HP 1m SFP+ 10GbE Copper Cable  
HP 3m SFP+ 10GbE Copper Cable  
HP 5m SFP+ 10GbE Copper Cable  
HP 7m SFP+ 10GbE Copper Cable  
SFP  
HP BladeSystem 10Gb SR SFP+  
HP BladeSystem 10Gb LRM SFP+  
HP ProCurve 10-GbE SFP+ 1m Direct Attach Cable  
HP ProCurve 10-GbE SFP+ 3m Direct Attach Cable  
HP ProCurve 10-GbE SFP+ 7m Direct Attach Cable  
HP ProCurve 10-GbE SFP+ SR Transceiver  
HP ProCurve 10-GbE SFP+ LRM Transceiver  
HP NC522SFP Dual Port 10GbE Server Adapter  
HP NC524SFP Dual Port 10GbE Module  
J9283B  
J9285B  
J9150A  
J9152A  
NIC  
468332-B21  
489892-B21  
581201-B21  
467801-B21  
467799-B21  
581204-B21  
614203-B21  
Reference sell  
488074-B22  
467801-B21  
HP NC550SFP Dual Port 10GbE Server Adapter  
HP NC522m Dual Port Flex -10 10GbE Multifunction BL-c Adapter  
HP NC532m 10GbE Dual Port Flex-10 10GbE Multifunction BL-c Adapter  
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter  
HP NC552SFP 10GbE 2P Svr Adapter  
iSCSI HBA - standup Qlogic QLe4062c  
iSCSI HBA - mezz  
NIC - mezz  
HP BLc QLogic iSCSI Dual Port Adapter with Virtual Connect Kit  
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter  
Step 4c - Choose Supported Options For SAS connection  
HP SC08e 6Gb SAS HBA for G6 and G7 rack servers  
HP H221 Host Bus Adapter for Gen8 servers  
614988-B21  
650931-B21  
488348-B21  
513778-B21  
BK763A  
HP Smart Array P712m Controller/256 for Server Blades  
HP Smart Array P711m Controller/1 for Server Blades  
HP 6Gb/s SAS BL Switch - Single Pack for BladeSystems  
HP 6Gb/s SAS BL Switch - Dual Pack for BladeSystems  
HP Ext Mini SAS 2M cable  
BK764A  
407339-B21  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 39  
 
QuickSpecs  
Configuration Information  
HP MSA P2000 G3 Modular Smart Array Systems  
HP Ext Mini SAS 4m cable - (only be used when connecting a SAS HBA or 6Gb SAS switch to a SAS  
controller. Connecting it to disk enclosures is not supported.)  
432238-B21  
Step 5 - Choose Rack Options  
Please refer to the HP Infrastructure products page for more information on HP racks and rack options or the HP 10000 G2 Series Rack  
QuickSpec.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 40  
 
QuickSpecs  
Technical Specifications  
HP MSA P2000 G3 Modular Smart Array Systems  
P2000 G3 FC  
POWER REQUIREMENTS  
P2000 G3 FC/iSCSI  
P2000 G3 SAS  
P2000 G3 10GbE iSCSI  
P2000 G3 iSCSI (1Gb)  
Input Power Requirements  
(typical-running I/O)  
SFF/LFF arrays  
8G FC (2 Port - 8G FC) 110VAC 3.32A, 344-390 W; 220VAC 1.61A,374-  
432W  
FC/iSCSI Combo (2 Port - 8G FC + 2 Port -1G iSCSI)  
110VAC; 3.64A,357-418W, 220VAC 1.77 A, 365-424W  
6G SAS (4 Port - 6G SAS) 110VAC 3.49A,344-390W, 220VAC 1.7A 374-  
432W  
10GbE iSCSI (2 Port - 10 GbE iSCSI) 110VAC 3.67A, 395W, 220VAC,1.95A  
388.2W  
1G iSCSI (4 Port - 1GbE iSCSI) 110VAC 3.3A 363W, 220VAC, 1.63A 360W  
Max Input Power  
Heat Dissipation  
100-240 VAC, 50/60 Hz., 4.5-1.9A; 48-60 VDC 10.4A/8.3A  
1622 BTU/hr  
TEMPERATURE AND HUMIDITY RANGES  
Operating Temperature  
Shipping Temperature  
Operating Humidity  
41°F to 104°F (5°C to 40°C)  
-40°F to 158°F (-40°C to 70°C)  
10% to 90% RH @ 104°F (40°C) non-condensing  
Non-Operating Humidity Up to 93% RH @ 104°F (40°C)  
DECLARED ACOUSTIC NOISE LEVELS  
Sound Power  
A weighted sound power LWAd=6,75 B  
A weighted sound pressure LpAm - 55dB  
Sound Pressure  
SHOCK AND VIBRATION  
Shock, Operational  
Shock, Non-Operational  
Vibration, Operational  
10G's for 10 milliseconds  
15G 11ms half sine  
5-500Hz, 0.21Grms flat  
Vibration, Non-Operational 3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum  
PHYSICAL  
Height  
3.5 in/ 8.9 cm  
Depth (excluding cables) P2000 G3 SFF 24-bay array: 20.28 in / 51.510 cm  
(back of ear to back of  
controller handle)  
P2000 G3 LFF 12-bay array: 21.3 in. / 55.1 cm  
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)  
Width (body only)  
Chassis Weight  
(no controllers)  
P2000 LFF chassis: 34.1 lbs. (DC-pwr model: 37.9 lbs)  
P2000 SFF chassis: 32.3 lbs (DC-pwr model: 36.1 lbs)  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 41  
 
QuickSpecs  
Technical Specifications  
HP MSA P2000 G3 Modular Smart Array Systems  
P2000 G3 FC Controller  
User Interface  
Status and activity provided via management interfaces. Status Indicators on  
front of Controller  
FC/iSCSI Combo Controller  
P2000 G3 SAS Controller  
RAID Support  
Cache Memory  
0, 1, 3, 5, 6, 10, 50  
2GB Read/Write. ECC protection with backup to Flash memory (indefinite  
backup)  
P2000 G3 10GbE iSCSI  
Controller  
Cache Backup  
ECC protection with back up to flash memory (indefinite backup)  
yes  
Upgradeable Firmware  
P2000 G3 iSCSI Controller  
(1Gb)  
Disk Drive and Enclosure 6 Gb SAS - Serial Attached SCSI  
Protocol Support  
Host Ports  
FC: 2 x 8Gb Fibre Channel SFP+  
SAS: 4 -4x lane 6 Gb SAS Host Connections  
10GbE iSCSI: 2 x 10GbE SFP+  
1GbE iSCSI: 4 x 1GbE RJ45  
Expansion Port  
SAS (SFF8088) 4x lane 6 Gb SAS  
Weight, controller  
P2000 G3 Fibre Channel, FC/iSCSI, SAS, and 10GbE iSCSI MSA Controllers  
4.5lbs. 1GbE iSCSI is 4.89 lbs  
P2000 G3  
Safety  
UL 60950-1 (USA)  
Regulatory Info  
CAN/CSA-C22.2 No.60950-1-03 (Canada)  
EN 60950-1 (European Union)  
GS mark (Germany)  
IEC 60950-1 (International)  
CCC Mark (power supply only, China PRC)  
VCCI:2008-04 Class A (Japan)  
Electromagnetic  
Compatibility  
FCC 15:109(g) Class A (USA)  
ICES-003:2004 Class A (Canada)  
EN55022 : (European Union Class A); CISPR 22 (International Class A)  
EN61000-3-2 : (Harmonics) (European Union)  
EN61000-3-3 : (Flicker) (European Union)  
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International  
Immunity, Class A)  
AS/NZS CISPR 22, Class A (Australia, New Zealand)  
CNS 13438 Taiwan, Class A (Taiwan)  
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)  
RoHS-6/6 Compliance, China RoHS, WEEE  
RoHS and WEEE  
Country Approvals  
United States ,Australia/New Zealand, Canada, China (PRC), European Union,  
Germany (GS Mark), Japan, South Korea, Taiwan  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 42  
 
QuickSpecs  
Technical Specifications  
HP MSA P2000 G3 Modular Smart Array Systems  
© Copyright 2013 Hewlett-Packard Development Company, L.P.  
The information contained herein is subject to change without notice.  
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel  
Corporation. Unix is a registered trademark of The Open Group.  
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and  
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial  
errors or omissions contained herein.  
DA - 13551 North America — Version 36 — December 9, 2013  
Page 43  
 

Grizzly Guitar H8068 User Manual
GSI Outdoors Clothes Dryer PNEG 630 User Manual
Haier Clothes Dryer HDY D70 E User Manual
Haier Washer Dryer HWM65 828 User Manual
Heat Glo LifeStyle Indoor Fireplace DAKOTA AU User Manual
HP Hewlett Packard All in One Printer 7130 printer User Manual
HP Hewlett Packard Waterskis E1312A User Manual
Husqvarna Snow Blower 1130SB XLS User Manual
IFoundry Systems Network Card IFSYS 8004 User Manual
Impex Home Gym WM 1501 User Manual