Havis Shields Work Light KR DL User Manual

Dome Light KR-DL  
Installation Instructions  
Warning: Please read all instructions and warnings prior to installation of the Dome Light.  
TOOLS REQUIRED:  
Phillips Screw Driver  
Wire Cutter  
HARDWARE: (Supplied in Kit)  
Qty. Description  
Qty.  
Description  
2
2
#8-32 Machine Screw  
#8 KEP Nut  
2
2
#8 Fender Washer  
#8 Sheet Metal Screw  
INSTALLATION:  
1. Mounting:  
A drill template is provided on the back of this instruction sheet. Detach the  
template, position it on the desired location for installation, and mark drill locations.  
Caution: Before drilling holes, ensure that the mounting surfaces are clear and that the  
screws will not damage the internal parts of the vehicle.  
Caution: Ensure that the Dome Light is installed in areas recommended by the vehicle  
manufacturer.  
Drill the mounting holes.  
Connect the power leads using wire splices.  
Remove the template prior to installing the fixture. Secure the base of the fixture in  
position using the supplied machine screws, washers, and nuts.  
Caution: Thread forming screws are supplied for alternate installations. If the fixture needs to  
be mounted with thread forming screws, please note that it may not always be sufficiently  
secured. It is at the sole discretion of the installer to determine the suitability of using thread-  
forming screws for a particular installation.  
The fixture is supplied with two clear lenses and two red lenses. Install two lenses  
suitable for the vehicle.  
Test the fixture for proper operation.  
 

Graco Electric Heater 313749A User Manual
H2O Audio Headphones LG User Manual
Hamilton Beach Iron 840131600 User Manual
Harman Kardon Universal Remote TC30 User Manual
Hasbro Games Mickey Mouse Clubhouse User Manual
Heartland Bakeware Cooktop 3800 3820 User Manual
Honeywell Heat Pump HZ322 User Manual
HP Hewlett Packard Calculator HP 12C User Manual
Husqvarna Brush Cutter M48 Pro M53 S Pro User Manual
IBM Laptop MT2668 User Manual