Havis Shields Laptop Docking Station DS PAN 103 User Manual

6
5
4
2
8
3
1
7
INSTALLATION INSTRUCTIONS:  
1. REMOVE THE 1/4-20 X 5/8" BHCS HOLDING THE MOUNTING  
BRACKET TO THE REST OF THE DOCKING STATION (THE SCREWS  
IN THE PLASTIC SIDE-MEMBERS ON EACH SIDE OF THE DOCK).  
PULL MOUNTING BRACKET OFF OF DOCKING STATION.  
D
D
2. SET MOUNTING BRACKET ON TOP OF DESIRED SURFACE SO  
THAT 3 OF THE HOLES ON THE MOUNTING BRACKET LINE UP WITH  
3 TAPPED HOLES OF THE MOTION ACCESSORY. (IF 3 HOLES ARE  
NOT AVAILABLE THEN USE 2.) SEE *RECOMMENDED HOLES* OF  
THE MOUNTING BRACKET.  
3. FASTEN THE MOUNTING BRACKET TO THE MOTION ACCESSORY  
USING (3X) 1/4-20 X 5/8" BHCS (OR 2 DEPENDING ON AVAILABILITY).  
4. PLACE DOCKING STATION OVER TOP OF MOUNTING BRACKET  
SO THAT THE 2 THREADED HOLES IN EACH FLANGE OF THE  
MOUNTING BRACKET LINE UP WITH THE 2 HOLES IN EACH PLASTIC  
SIDE-MEMBER.  
5. FASTEN THE DOCKING STATION BACK TO THE MOUNTING  
BRACKET USING (4X) 1/4-20 X 5/8" BHCS.  
C
C
6. TIGHTEN ALL FASTENERS TO THE INDICATED TORQUE  
RECOMMENDATIONS.  
(4X) 1/4-20 X 5/8" BHCS  
(120 +/-10% IN-LBS)  
(3X) 1/4-20 X 5/8" BHCS  
(120 +/-10% IN-LBS)  
*USE 3 SCREWS TO FASTEN  
DOCK DOWN IF POSSIBLE*  
(MOUNTING BRACKET OF  
DOCKING STATION)  
B
B
*RECOMMENDED HOLES  
FOR MOUNTING WITH  
2 SCREWS*  
HARDWARE KIT CONTENTS:  
PRODUCT I.D.  
DATE  
01-30-07  
DS-PAN-101  
PRODUCT NAME  
*RECOMMENDED HOLES  
FOR MOUNTING WITH  
3 SCREWS*  
A
A
DS-PAN-101  
DOCKING STATION  
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,  
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND  
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE  
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY  
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN  
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND  
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE  
OPERATING VEHICLE.  
PRODUCT DESCRIPTION  
WEIGHT: (LBS)  
THIS PRODUCT IS USED WITH THE PANASONIC  
CF-28/29/30 TOUGHBOOK COMPUTERS  
DRAWING NUMBER:  
6.6  
REV. DATE  
D3-0036-IS-G  
(SHEET 1 OF 2)  
(THE FEATURES OF THIS PRODUCT MAY BE LIMITED  
DEPENDING UPON THE MODEL OF COMPUTER USED.)  
1-800-524-9900  
WWW.HAVIS.COM  
12-07-09  
F-730-019 REV A  
8
7
6
4
3
2
5
1
 

Graco Inc Paint Sprayer 1095 Premium Hi User Manual
Grizzly Paint Sprayer G5352 User Manual
Haier Air Conditioner 0010571223 User Manual
Harman Stove Company Stove PP38+ User Manual
Hasbro Robotics 69239 User Manual
Hotpoint Dishwasher FDEF 4101 User Manual
HP Hewlett Packard Personal Computer 315EU User Manual
Humminbird Fish Finder TCR ID 10 User Manual
Hunter Fan Fan 90245 User Manual
Hunter Fan Outdoor Ceiling Fan MD506 01 User Manual