Havis Shields Automobile Parts C TCB 19 User Manual

INSTALL INSTRUCTIONS C-TCB-19  
UNIVERSAL SIDE MOUNT  
TOOLS REQUIRED:  
3/16” Allen wrench  
3/8” Standard Socket Set  
3/8” Ratcheting Wrench  
Powered drill w/ drill bit set  
Open-end wrench set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
1
1
8
16  
8
Pole support assembly  
Telescoping pole assembly  
¼-20 Nylock nut  
¼” Flat washer  
¼-20 x ¾” Hex head bolt  
CM93071-19  
CM93072-1  
GSM30016  
GSM31005  
GSM33001  
Always!  
Read all instructions before installing any Havis-Shields Equipment Corp products.  
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!  
Use hardware provided with install kit  
SUB ASSEMBLY:  
Telescoping pole  
assembly  
1. Confirm receipt of all hardware and components.  
2. Determine location to mount TCB.  
INSTALLATION:  
1. MOUNT SUPPORT BRACKETS:  
With location determined, mark mounting holes using  
lower support bracket as template.  
Drill ¼” holes on these marks.  
Attach lower support bracket to desired surface using ¼-20  
x ¾” hex head bolts, washers and nylock nuts.  
Following same procedure for lower support bracket mark  
and drill holes for upper support bracket.  
Mount optional C-3090, computer-mounting platform, to  
telescoping pole assembly using hardware and instructions  
provided with C-3090.  
Upper  
Support  
Bracket  
Lower  
Support  
Bracket  
C-TCB-19-INST-8-05  
 

Grace MP3 Docking Station SCN300W User Manual
Graco Baby Furniture PD241547B User Manual
Graco Indoor Furnishings 309911C User Manual
HANNspree Tablet Accessory HSG1303 User Manual
HP Hewlett Packard Laptop 41010us User Manual
HP Hewlett Packard Network Card A4800A User Manual
HP Hewlett Packard Scanner 5400c Series 4400c Series User Manual
Hunter Fan Doll 44273 User Manual
IBM Laptop 600X User Manual
iHome MP3 Docking Station iH13 User Manual