Havis Shields Automobile Accessories P MFK 9 User Manual

INSTALLATION INSTRUCTIONS  
P-REAR-1 W/P-MFK-9  
REAR PARTITION W/FILLER PANEL MOUNTING KIT  
1997-2008 CHEVROLET PASSENGER VANS  
Always!  
Read all instructions before installing any Havis-Shields Equipment Corp products.  
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!  
Use hardware provided with install kit  
TOOLS REQUIRED:  
Power drill  
Drill bit set  
Standard socket set  
Ratcheting wrench  
COMPONENTS:  
QTY DESCRIPTION  
PART #  
1
1
Partition  
Mounting Filler Kit  
P-REAR-1  
P-MFK-9  
P-MFK-9 COMPONENTS:  
QTY DESCRIPTION  
1
1
Passenger Side Filler Panel  
Driver Side Filler Panel  
HARDWARE:  
QTY DESCRIPTION  
PART #  
5
2
¼” x 1 ½” Hex Head Lag bolts  
¼” x 3” Hex Head Lag bolts  
GSM33062  
GSM33094  
INSTALLATION:  
Place and position partition with spring clips facing towards rear of vehicle.  
Bottom frame of partition will be approximately 8 ½” from edge of door Frame.  
Partition will contour trim just inside rear doors of vehicle.  
Drill 3/16” pilot holes into floor of vehicle.  
Loosely bolt partition to vehicle using ¼” x 1 ½” Hex head lag bolts.  
Pre-drill top mounting holes with 3/16” bit. Attach to vehicle using ¼” x 3” Hex head  
lag bolts.  
Tighten all loose hardware  
Install seat back to its original position.  
P-REAR-1^MFK-9_INST_9-07  
 

Hamilton Beach Coffee Grinder 80365C User Manual
Hamilton Watch Watch Multi Touch Watch User Manual
Harbor Freight Tools Vacuum Cleaner 95834 User Manual
Honeywell Air Cleaner F112C User Manual
Honeywell Network Card 9782 Series User Manual
Hotpoint Dishwasher FDYF 1100 User Manual
HP Hewlett Packard Network Card J8763A User Manual
HP Hewlett Packard Server 704941 001 User Manual
IFoundry Systems Network Card IFSYS 8003 User Manual
iHome Stereo System IP39 User Manual