Havis Shields Automobile Accessories C TM EXPD User Manual

INSTALL INSTRUCTIONS C-TM-EXPD  
HEAVY DUTY TRAK MOUNT  
2003-2006 FORD EXPEDITION  
TOOLS REQUIRED:  
Metric socket set  
Ratcheting wrench  
Standard socket set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
16  
8
8
8
1
¼-20 x 3/4” Hex Head Bolt  
¼” Flat Washer  
¼” Lock washer  
¼” Serrated nut  
Front transmission hump bracket  
Rear transmission hump bracket  
32” Trak Mount  
GSM33001  
GSM31005  
GSM31026  
GSM30023  
C-B35  
1
1
C-B36  
C-TM-32E  
Always!  
Read all instructions before installing any Havis-Shields Equipment Corp products.  
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!  
Use hardware provided with install kit  
For product support, visit the Install Instructions Section of our website at  
Front  
INSTALLATION:  
1. Remove O.E.M. console if applicable.  
2. Remove inner front and rear seat-  
mounting bolts near transmission hump.  
Loosen outer bolts only.  
3. Place front and rear hump brackets legs  
in place under seat brackets. Do not bolt  
down.  
4. Position cross piece and trak mount on  
top of legs.  
5. Determine best position for application.  
6. Attach trak to cross pieces using ¼” x  
¾” hex bolts and serrated nuts.  
7. Attach trak and cross piece assembly to  
mounting legs using ¼” x ¾” bolts and  
washers.  
Rear  
8. Tighten all seat bolts  
9. Attach console and/or accessories.  
C-TM-EXPD-INST-2-07  
 

Graco Thermostat 206661 User Manual
Grindmaster Coffeemaker Single Cup Pod Brewer User Manual
Haier Washer HW55 1010 User Manual
Havis Shields Automobile Parts C TCB 34 User Manual
Hoshizaki Ice Maker DCM 270BAH OS User Manual
Hotpoint Oven BS62 User Manual
HP Hewlett Packard Network Card 5 xx Series 4 User Manual
HP Hewlett Packard Network Router 30292B User Manual
HP Hewlett Packard Sprinkler 651B User Manual
Hunter Fan Universal Remote 90061 User Manual