Havis Shields Automobile Accessories C TCB 31 User Manual

INSTALL INSTRUCTIONS C-TCB-31  
2004-2007 FORD F-150 (EXCLUDING HERITAGE)  
TOOLS REQUIRED:  
Standard Socket Set  
Ratcheting Wrench  
Open-end Wrench Set  
HARDWARE:  
QTY DESCRIPTION  
PART #  
1
2
1
5/16-18 x 1” Hex head bolt  
5/16” Flat washers  
5/16-18 Nylock Nut  
GSM33012  
GSM31006  
GSM30017  
SUB ASSEMBLY:  
1. Identify hardware and components.  
2. Remove inner and outer seat base bolts on passenger side front seat.  
INSTALLATION:  
1. POSITION C-TCB-31:  
Lean seat back and slide C-TCB-31 Base between floor of vehicle and seat base on  
inner bolt.  
Screw in factory seat base inner bolt and hand tighten at this time.  
Slide cross brace under passenger seat base outer bolt.  
Screw in factory seat base outer bolt and hand tighten at this time.  
Bolt cross brace to tab on square tube of Base using 5/16-18 x 1” Hex head bolt,  
washers and Nylock nut.  
Tighten all bolts at this time.  
Note: It is recommended to mount C-TCB-31 base as far under seat base as possible.  
Inner Pole  
Base  
Cross Brace  
C-TCB-31-INST-1-07  
 

Grindmaster Juicer JX15AC User Manual
Grizzly Sander H2882 User Manual
Haicom GPS Receiver HI 406BT C User Manual
Haier CRT Television HTAF21S User Manual
Haier TV DVD Combo TCR13 A User Manual
Harbor Freight Tools Impact Driver 31877 User Manual
Harbor Freight Tools Staple Gun 40115 User Manual
Hasbro Games 06032 User Manual
Hotpoint Sander NWSR483EB User Manual
Ikelite Digital Camera 1030 SW User Manual