INSTALL INSTRUCTIONS C-TCB-28
1997-2007 DODGE DAKOTA
TELESCOPING COMPUTER BASE
TOOLS REQUIRED:
Ratcheting wrench
3/8” Metric Socket Set
T-20 torx bit
Combination wrench set
Powered Drill
Drill Bit set
3/8” Standard Socket Set
HARDWARE:
QTY DESCRIPTION
PART #
4
1
1
1
1
1
1
1
1
¼” x 1” Hex head lag bolt
5/16” Flat Washer
5/16” Nylock Nut
“Z” Bracket Support
¼” x ¾” Carriage Bolt
¼” Serrated Nut
Pole Support Assembly
Lateral Support Brace
Inner Telescoping Pole Assembly
GSM33060
GSM31006
GSM30017
CM002001
GSM32000
GSM30023
CM93071-28W
CM93146
CM93072-3
Always!
ꢀ Disconnect the vehicles’ battery. Removing seat bolts on some vehicles may give the
vehicles computer a false reading leading to warning lights on dash. This requires the
vehicles’ computer to be reset.
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit.
ꢀ For product support, visit the Install Instructions Section of our website at
1-800-524-9900.
Loosely attach lateral support brace
to TCB base using 5/16” flat washer
and 5/16” nylock nut
Pre-drill floor of vehicle with 3/16”
drill bit. Use holes in the support
brace as a drill template
Attach support brace to floor using
¼” x 1” hex head lag bolts
Tighten 5/16” nylock nut
Insert inner telescoping pole
assembly and thread lock handle
into pole support base assembly.
Final Installation
Install C-3090-x laptop platform (sold separately)
C-TCB-28-INST-6-07
3
|
Hamilton Beach Oven 22703 User Manual
Hearth and Home Technologies Indoor Fireplace 8000CFLP OAKIPI User Manual
Heath Zenith Home Safety Product SH 5316 User Manual
Heath Zenith Work Light UT 5666 AL User Manual
Honeywell Air Cleaner HHT 080 User Manual
Hotpoint Clothes Dryer TVF770 User Manual
HP Hewlett Packard Calculator 10BII User Manual
HP Hewlett Packard Electric Heater 11744195 User Manual
HP Hewlett Packard Yard Vacuum 83540d User Manual
Husqvarna Snow Blower 10527STE User Manual