Havis Shields Automobile Accessories C 3610 CV User Manual

INSTALL INSTRUCTIONS C-3610-CV  
PENTAX PRINTER MOUNT ‘96-08 FORD CROWN VICTORIA  
TOOLS REQUIRED:  
Power Drill  
Drill Bit Set  
Phillips Screwdriver  
Wire Crimping Tool  
HARDWARE:  
QTY DESCRIPTION  
PART #  
3
3
5
1
#10 X ½” Sheet metal screw  
GSM33194  
GSM33195  
CM86508  
GSM33118  
#10 X ¾” Sheet metal screw  
#8 X 3/8” Black torx screw  
#10 X ½” Machine screw  
REMOVE:  
1. Using Phillips screw driver, remove existing inner plastic glove box assembly.  
(Do not remove glove box door)  
INSTALLATION:  
1. Subassembly:  
Position printer housing inside glove box  
opening on left side. (Approximately 1”  
inch from side)  
Using the housing hinge as a template,  
mark the three mounting holes.  
The hinge rod should be above the glove  
box fame. This is critical to allow the  
glove box door to close.  
Drill (3) 9/64” holes  
Housing Hinge Location  
2. Glove box filler:  
The 2000 and newer model years  
requires a glove box door filler (CM93605).  
Attach this filler with (5) #8 X 3/8” Black torx screws.  
On vehicle model years 1996-1999 – remove glove box retractor.  
Note: 1999 and older models do not get this filler.  
3. Mount Printer Housing:  
Note: Printer should Not be in the housing yet.  
Mount housing assembly using (3) #10 x ¾” sheet metal screws.  
(These screws go through the hinge and the holes you drilled in subassembly)  
 

GPX Portable Stereo System BI100S User Manual
Grundig CRT Television LW 51 7610 TOP User Manual
Harbor Freight Tools Sander 45813 User Manual
Harbor Freight Tools Vacuum Cleaner 3794 User Manual
Hotpoint Oven SN56EX User Manual
HP Hewlett Packard Digital Camera 930 Series User Manual
Huffy Fitness Equipment 211583 User Manual
Hyundai Car Video System L91A User Manual
Ikelite Camcorder Accessories 12 User Manual
Image Treadmill IMTL119050 User Manual