MODEL T10148
SWIVEL BASE
INSTRUCTIONS
Installation
For.easy.and.safe.base.installation,.attach.lifting.
straps.or.chains.to.the.vise.at.the.four.locations.
shown. in. figure 1, and. using. a. suitable. lifting.
apparatus,.raise.the.vise.
Your vise and swivel base are heavy! Get the
assistance of a second person or use a hoist
when lifting the vise and installing the swivel
base. Wear heavy duty leather boots for foot
and toe protection, and keep hands and fin-
gers away from all pinch points. Ignoring this
warning can lead to a severe crushing injury
or finger amputation!
T10148
Specifications
T-Bolt.and.Nut
Length.......................................................... 131⁄2
"
"
3
T10148.Swivel.Base
T10147.Hydraulic.Vise
Width............................................................12.⁄4
Overall.Height.(Pin.Tip.to.Base.Underside).. 27⁄16"
T-Bolt.Bolt.Pattern.(On.Center)...................... 73⁄4
"
Alignment.Dogs.Bolt.Pattern.(On.Center).......10"
Base.to.Table.Bolt.Pattern.(On.Center)...........12"
Replaceable.Spindle.Diameter................... 16mm
Surface.Parallelism.........................0.015/100mm
Alignment.Dog.Width................................. 16mm
Alignment.Dogs.......................................Included
T-Bolts.and.Nuts......................................Included
figure 1. Model.T10147.vise installed.on.the.
Model.T10148.base.
Block.the.vise.for.safety,.and.lubricate.the.base.
and.vise.mating.surfaces.with.white.lithium.grease..
Secure. the. base. and. vise. together. with. the. two.
T-bolts.and.nuts.
T-Bolt.Size.........................................1⁄2"-11.x.23⁄8
"
T-Bolt.Nut.Size............................................1⁄2"-11
360° Scale.................... Marked 0°-90° Every.90°.
Scale.Incrimination............................................1°.
Swivel.Base.Body................. Ductile.Iron.FCD60
Weight........................................................32.lbs.
Maintenance
Depending.on.type.of.cutting.fluids.used,.operat-
ing. environment,. and. frequency. of. use,. periodi-
cally.remove.the.swivel.base.from.the.vise..Clean.
all.mating.surfaces,.the.spindle,.and.the.bore.with.
mineral.spirits..Then,.re-lubricate.all.cleaned.sur-
faces.with.white.lithium.grease.and.reassemble.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
COPyRIgHT.©.JANUARy,.2009.By.gRIzzLy.INDUSTRIAL,.INC.
WARNING: NO pORTION Of ThIS MANUAL MAY BE REpRODUCED IN ANY ShApE
OR fORM WIThOUT ThE WRITTEN AppROVAL Of GRIzzLY INDUSTRIAL, INC.
.#CR11497..pRINTED IN TAIWAN
|
Graco Blood Pressure Monitor 3A1331C User Manual
Hamilton Beach Juicer 66333 User Manual
HannsG Computer Monitor HG191AP User Manual
Hasbro Home Safety Product 06573 User Manual
Healthrider Home Gym HREVEL05983 User Manual
Hotpoint Clothes Dryer TCEL 87B User Manual
Hotpoint Microwave Oven BS63E User Manual
HP Hewlett Packard Power Supply 9483C User Manual
Huffy Fitness Equipment 104 03P N211956B User Manual
iLive MP3 Docking Station IBP182B User Manual