Grizzly Switch G8992 User Manual

MODEL G8992

110V MAGNETIC ON/OFF

SWITCH

INSTRUCTIONS

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installation must only be performed by an

Figure 1. g8992 Magnetic on/oFF switch.

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

Introduction

the Model g8992 features a recessed magnetic

on (|) button. the switch assembly is designed

to snap into a 1¹⁄8" x 1⁷⁄8" rectangular hole.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

Specifications

rated Voltage.............................................. 110V

rated Current..................................................6A

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.

WARNING: NO pORTION OF THIS INSTRUCTION SHEET MAy bE REpRODUCED IN ANy SHApE

OR FORM WITHOUT THE WRITTEN AppROVAL OF GRIzzLy INDUSTRIAL, INC.

#ts13925 printed in ChinA